Who are the manufacturers of JAPAN STEEL WORKS AMERICA INC?
Let's check JAPAN STEEL WORKS AMERICA INC's supplier list!
japan steel works america inc is a , and company. This page shows the major manufacturers of JAPAN STEEL WORKS AMERICA INC. Results are limited to 15 suppliers, if you want to see more suppliers visit the manufacturers page of JAPAN STEEL WORKS AMERICA INC.
address of japan steel works america inc:
41135 vincenti court novi mi 48375 u s a
Select years of JAPAN STEEL WORKS AMERICA INC data:
Supplier list of JAPAN STEEL WORKS AMERICA INC
japan steel works america inc imports
most of their products from:
- 1. JAPAN
- 2. REPUBLIC OF KOREA
- 1
THE JAPAN ST…
- 176 trades
-
ACE
2024-12-27 |
15 PCS |
6711KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2024-12-20 |
1 CAS |
760KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-12-05 |
17 UNT |
168690KG |
INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY 5 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1600 METRIC TON MODEL JM1600AD MR 2300H 2300H 1SET HS CODE 8477. 10 EMAIL [email protected] INJECTION MOULDING MACHINERY 3 INJECTION MOULDING MACHINERY 2 PO 16917 INJECTION MOULDING MACHINERY |
HS 847710 |
2024-11-25 |
4 PCS |
7999KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-11-25 |
4 PCS |
7999KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-11-24 |
6 PCS |
33628KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-11-20 |
1 PKG |
297KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-11-20 |
2 CAS |
3842KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-11-20 |
2 CAS |
3842KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-11-20 |
1 PKG |
297KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-11-19 |
2 PKG |
630KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-11-19 |
2 PKG |
345KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-11-19 |
1 PKG |
122KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-11-19 |
2 PKG |
630KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-11-19 |
2 PKG |
345KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-11-19 |
1 PKG |
122KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-10-29 |
1 PKG |
643KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-10-29 |
1 PKG |
331KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-10-29 |
1 PKG |
643KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-10-29 |
1 PKG |
331KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-10-29 |
1 PKG |
643KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-10-29 |
1 PKG |
331KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-10-18 |
2 CAS |
50000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2024-10-13 |
1 PKG |
574KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-10-13 |
1 PKG |
284KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-10-13 |
1 PKG |
574KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-10-13 |
1 PKG |
284KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-09-26 |
1 PKG |
155KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-09-26 |
1 PKG |
100KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-09-26 |
1 PKG |
155KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-09-26 |
1 PKG |
100KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-09-26 |
2 UNT |
39320KG |
J650ADS 2300H INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM |
HS 847710 |
2024-09-26 |
6 PCS |
15952KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-09-21 |
8 PCS |
12847KG |
TAC MANUFACTURING , INC. |
HS 847529 |
2024-09-21 |
5 PCS |
24370KG |
II STANLEY |
HS 294200 |
2024-09-21 |
8 PCS |
12847KG |
TAC MANUFACTURING , INC. |
HS 847529 |
2024-09-21 |
5 PCS |
24370KG |
II STANLEY |
HS 294200 |
2024-09-13 |
1 PKG |
133KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-09-13 |
1 PKG |
202KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-09-13 |
1 PKG |
202KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-09-13 |
1 PKG |
133KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-09-13 |
1 PKG |
202KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-09-13 |
1 PKG |
133KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-08-30 |
4 CAS |
4482KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-08-30 |
1 PKG |
1230KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-08-30 |
1 PKG |
1230KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-08-30 |
4 CAS |
4482KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-08-30 |
1 PKG |
1230KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-08-30 |
4 CAS |
4482KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-08-26 |
6 UNT |
113650KG |
J850ADW 3900H INJECTION MOLDING MACHINE J850ADW 3900H INJECTION MOLDING MACHINE 2 SETS OF JSW INJECTION MOLDING MACHINE MODE L J850ADSW 3900H WITH SPACER KIT PL INJ HS CODE 8477.10 EMAIL INJECTION_SALES@JSWAMERI CA.COM 2 SETS OF JSW INJECTION MOLDING MACHINE MODE L J850ADSW 3900H WITH SPACER KIT PL INJ HS CODE 8477.10 EMAIL INJECTION_SALES@JSWAMERI CA.COM 2 SETS OF JSW INJECTION MOLDING MACHINE MODE L J850ADSW 3900H WITH SPACER KIT PL INJ HS CODE 8477.10 EMAIL INJECTION_SALES@JSWAMERI CA.COM 2 SETS OF JSW INJECTION MOLDING MACHINE MODE L J850ADSW 3900H WITH SPACER KIT PL INJ HS CODE 8477.10 EMAIL INJECTION_SALES@JSWAMERI CA.COM |
HS 847710 |
2024-08-23 |
2 CAS |
2550KG |
PARTS FOR MEIKI INJECTION MOLDING MACHINE HS . |
HS 847790 |
2024-08-23 |
6 PCS |
12264KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-08-23 |
2 CAS |
2550KG |
PARTS FOR MEIKI INJECTION MOLDING MACHINE HS . |
HS 847790 |
2024-08-20 |
2 CAS |
50000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2024-08-15 |
1 CAS |
13260KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-08-15 |
2 CAS |
6669KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-08-15 |
1 CAS |
13260KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-08-15 |
2 CAS |
6669KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-08-04 |
3 PCS |
4832KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-07-29 |
3 PKG |
1796KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-07-29 |
3 PKG |
1796KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-07-29 |
3 PKG |
1796KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-07-24 |
6 PCS |
12264KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-07-24 |
12 PCS |
31900KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-07-24 |
12 PCS |
18088KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-07-20 |
4 UNT |
62840KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 MM23 2089 J550ADS 1400H MM23 2089 J550ADS 1400H |
HS 847710 |
2024-07-13 |
1 PKG |
146KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-07-13 |
1 PKG |
146KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-07-12 |
9 PCS |
8683KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-07-12 |
12 PCS |
12260KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-06-29 |
2 UNT |
46520KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM |
HS 847710 |
2024-06-28 |
2 PKG |
620KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-06-28 |
1 PKG |
300KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-06-28 |
6 PCS |
33640KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-06-28 |
12 PCS |
67256KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-06-28 |
2 PKG |
620KG |
TRANSMISSION SHAFTS (INCLUDING CAM SHAFTS ANDCRANK SHAFTS) AND CRANKS; BEARING HOUSINGS A ND PLAIN SHAFT BEARINGS; GEARS AND GEARING; B |
HS 848330 |
2024-06-28 |
1 PKG |
300KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-06-28 |
12 PCS |
67256KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-06-28 |
6 PCS |
33640KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-06-14 |
12 PCS |
24210KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-06-07 |
6 PCS |
12264KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-06-07 |
6 PCS |
12264KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-05-24 |
8 PCS |
6922KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-05-17 |
1 PKG |
214KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-17 |
4 CAS |
6910KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-17 |
2 CAS |
10480KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-17 |
1 CAS |
5180KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-17 |
3 UNT |
34405KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM J550ADS 2300H INJECTION MOLDING MACHINE |
HS 847710 |
2024-05-17 |
1 PKG |
214KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-17 |
4 CAS |
6910KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-17 |
2 CAS |
10480KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-17 |
1 CAS |
5180KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-13 |
3 UNT |
39840KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 650 METRIC TON MODEL J650ADS 2300H 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 650 METRIC TON MODEL J650ADS 2300H 1 SET HS CODE 8477.10 EMAIL [email protected] J650ADS 2300H JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-05-03 |
6 PKG |
11940KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-03 |
1 PKG |
1420KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-03 |
1 PKG |
980KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-03 |
1 PKG |
361KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-03 |
6 PKG |
11940KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-03 |
1 PKG |
1420KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-03 |
1 PKG |
980KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-05-03 |
1 PKG |
361KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-28 |
2 PKG |
1414KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-28 |
6 PCS |
6130KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-04-28 |
2 PKG |
1414KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-28 |
6 PCS |
6130KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-04-28 |
2 PKG |
1414KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-24 |
2 CAS |
50000KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-04-24 |
5 UNT |
83200KG |
2 SETS OF INJECTION MOLDING MACHINE FOR NJ DCHS CODE 8477.10 PO0016983 PO0016984 PO00 16985 EMAIL [email protected] 2 SETS OF INJECTION MOLDING MACHINE FOR NJ DCHS CODE 8477.10 PO0016983 PO0016984 PO00 16985 EMAIL [email protected] 2 SETS OF INJECTION MOLDING MACHINE FOR NJ DCHS CODE 8477.10 PO0016983 PO0016984 PO00 16985 EMAIL [email protected] INJECTION MOULDING MACHINERY 1 INJECTION MOULDING MACHINERY 1 |
HS 847710 |
2024-04-22 |
1 PKG |
720KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-22 |
2 PKG |
1277KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-22 |
6 PCS |
6130KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-04-22 |
1 PKG |
720KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-22 |
2 PKG |
1277KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-22 |
6 PCS |
6130KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-04-15 |
3 PKG |
2133KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-15 |
3 PKG |
2133KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-01 |
1 PKG |
253KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-04-01 |
2 PKG |
565KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-03-25 |
1 PKG |
3030KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-03-25 |
12 PCS |
12260KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-03-25 |
1 PKG |
3030KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-03-10 |
1 PKG |
226KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-03-10 |
12 PCS |
18928KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-03-09 |
2 CAS |
50000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2024-03-01 |
1 CAS |
184KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-02-23 |
3 PKG |
3366KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-02-23 |
1 PKG |
490KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-02-23 |
3 PKG |
3366KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-02-23 |
1 PKG |
490KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-02-17 |
4 UNT |
30840KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM |
HS 847710 |
2024-02-16 |
6 PCS |
16655KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-02-02 |
12 PCS |
12136KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-02-02 |
6 PCS |
6006KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-01-29 |
5 UNT |
103280KG |
J1300AD 5200H INJECTION MOLDING MACHINE 1 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM J1300AD 5200H INJECTION MOLDING MACHINE 3 |
HS 847710 |
2024-01-29 |
3 UNT |
34973KG |
JOB MM23 2032 3037 1 JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 550 METRIC TON MODEL J550AD S 2300H 1 SET HS CODE 8477.10 EMAIL I [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 550 METRIC TON MODEL J550AD S 2300H 1 SET HS CODE 8477.10 EMAIL I [email protected] |
HS 847710 |
2024-01-22 |
5 PCS |
8234KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2024-01-22 |
4 UNT |
66840KG |
MM23 3859 3860 3863 3864 INJECTION MOLDING MCHINE MM23 3859 3860 3863 3864 INJECTION MOLDING MCHINE PO0016628 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J550ADS 2 SETS IN JECTION UNIT ADS 2300H 2 SETS SC ADS 2300H 84MM 2 SETS HS CODE 8477.10 EMAIL [email protected] PO0016628 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J550ADS 2 SETS IN JECTION UNIT ADS 2300H 2 SETS SC ADS 2300H 84MM 2 SETS HS CODE 8477.10 EMAIL [email protected] |
HS 847710 |
2024-01-17 |
1 PKG |
1610KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-01-17 |
1 PKG |
1610KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-01-09 |
1 PKG |
425KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-01-09 |
1 PKG |
425KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2024-01-03 |
1 PKG |
120KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-12-29 |
2 UNT |
89000KG |
PO0016648 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J850ADSW 2 PCS HS CODE 8477.90 EMAIL INJECTION_SALES@JSWAM ERICA.COM PO0016648 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J850ADSW 2 PCS HS CODE 8477.90 EMAIL INJECTION_SALES@JSWAM ERICA.COM |
HS 847790 |
2023-12-29 |
5 UNT |
103280KG |
INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM INJECTION MOULDING MACHINERY 1 |
HS 847710 |
2023-12-26 |
6 PCS |
15786KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-12-26 |
1 PKG |
124KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-12-26 |
2 PKG |
494KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-12-26 |
1 PKG |
124KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-12-26 |
2 PKG |
494KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-12-08 |
2 UNT |
35020KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM MM23 2021 INJECTION MOLDING MACHINE 1 |
HS 847710 |
2023-12-07 |
5 PCS |
7835KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-12-01 |
8 PCS |
8327KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-11-23 |
2 UNT |
56940KG |
MM23 2026 3031 INJECTION MOLDING MACHINE 1 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM |
HS 847710 |
2023-11-23 |
4 UNT |
66840KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM MM23 2029 2030 INJECTION MOLDING MACHINE 1 MM23 2029 2030 INJECTION MOLDING MACHINE 1 |
HS 847710 |
2023-11-18 |
6 PCS |
12266KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-11-18 |
6 PCS |
9666KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-11-12 |
1 PKG |
332KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-11-12 |
1 PKG |
609KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-11-12 |
1 PKG |
332KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-11-12 |
1 PKG |
609KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-11-12 |
1 PKG |
332KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-11-12 |
1 PKG |
609KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-11-07 |
3 PKG |
1029KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-11-07 |
1 PKG |
160KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-11-07 |
3 PKG |
1029KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-11-07 |
1 PKG |
160KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-11-06 |
4 CAS |
100000KG |
JSW INJECTION MOLDING MACHINE COMP |
HS 847710 |
2023-10-29 |
1 UNT |
3780KG |
PO0016398 INJECTION MOLDING MACHINE PARTS FO R NJ DC SC ADS 3900H 100MM 2 PCS HS COD E 8477.90 EMAIL INJECTION_SALES@JSWAMERICA. COM |
HS 847790 |
2023-10-18 |
1 CAS |
610KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-18 |
2 CAS |
720KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-18 |
2 CAS |
720KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-18 |
1 CAS |
610KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-18 |
6 PCS |
15952KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-10-17 |
20 UNT |
198150KG |
3JSW J3000F 22000H GC22 0150 INJECTION MOULDING MACHINE 4JSW J3000F 22000H GC22 0150 INJECTION MOULDING MACHINE 1JSW J3000F 22000H GC22 0150 INJECTION MOULDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTIC S HS CODE 8477.10 EMAIL INJECTION_SAL [email protected] JSW J3000F 22000H GC22 0150 INJECTION MOULDING MACHINE 2JSW J3000F 22000H GC22 0150 INJECTION MOULDING MACHINE |
HS 847710 |
2023-10-11 |
4 UNT |
80760KG |
J650ADS 3100H CLAMPING UNIT J650ADS 3100H CLAMPING UNIT JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM |
HS 847710 |
2023-10-11 |
1 PKG |
160KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-11 |
1 PKG |
2140KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-11 |
1 PKG |
160KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-11 |
1 PKG |
2140KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-11 |
1 PKG |
160KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-11 |
1 PKG |
160KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-09 |
4 PCS |
7991KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-10-06 |
1 CAS |
1240KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-06 |
3 CAS |
4988KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-06 |
1 CAS |
138KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-10-05 |
6 PCS |
9466KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-09-30 |
1 PKG |
247KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-09-29 |
6 PCS |
15950KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-09-24 |
1 CAS |
25300KG |
JSW INJECTION MOLDING MACHINE COM |
HS 847710 |
2023-09-21 |
4 PCS |
18598KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-09-17 |
2 CAS |
25826KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-09-17 |
27 UNT |
236165KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM MM22 1603 CLAMPING UNIT 2 MM22 1603 CLAMPING UNIT 2 MM22 1603 CLAMPING UNIT 1 |
HS 847710 |
2023-09-11 |
5 CAS |
58620KG |
JSW INJECTION MOLDING MACHINE COMP |
HS 847710 |
2023-09-10 |
1 PKG |
329KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-09-10 |
1 PKG |
285KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-09-10 |
1 PKG |
820KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-09-10 |
1 PKG |
329KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-09-10 |
1 PKG |
285KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-09-10 |
1 PKG |
820KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS OR FOR THE MANUFACTURE OF PRODUCTS FROM THESE MATERIALS, NOT SPECIFIED OR INCLUDED ELSEWHERE I |
HS 847780 |
2023-09-08 |
1 PKG |
305KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS ER OR MANUFACTURED RUBBER OR PLASTIC PRODUCT |
HS 847790 |
2023-09-08 |
3 PKG |
4560KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS ER OR MANUFACTURED RUBBER OR PLASTIC PRODUCT |
HS 847790 |
2023-09-08 |
6 PCS |
9666KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-09-08 |
1 PKG |
305KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS ER OR MANUFACTURED RUBBER OR PLASTIC PRODUCT |
HS 847790 |
2023-09-08 |
3 PKG |
4560KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS ER OR MANUFACTURED RUBBER OR PLASTIC PRODUCT |
HS 847790 |
2023-08-31 |
17 PCS |
22749KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-08-17 |
1 CAS |
25300KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-08-17 |
5 CAS |
46400KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-08-17 |
19 UNT |
93700KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 1300 METRIC TON MODEL M1300C2 VR2 3CJ JE 1 SET HS CODE 8477.10 EMAIL [email protected] GC22 0187 INJECTION MOULDING MACHINERY |
HS 847710 |
2023-08-03 |
14 UNT |
216000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM J2500AD 9500H INJECTION MOLDING MACHINE TIE BAR 3 J2500AD 9500H INJECTION MOLDING MACHINE TIE BAR 4 J2500AD 9500H INJECTION MOLDING MACHINE TIE BAR 1 J2500AD 9500H INJECTION MOLDING MACHINE TIE BAR 1 J2500AD 9500H INJECTION MOLDING MACHINE TIE BAR 2 |
HS 847710 |
2023-08-01 |
3 PCS |
4732KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-08-01 |
2 PKG |
928KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS ER OR MANUFACTURED RUBBER OR PLASTIC PRODUCT |
HS 847790 |
2023-07-31 |
2 CAS |
50000KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-07-28 |
11 CAS |
17169KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-07-22 |
4 UNT |
66840KG |
INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY PO0016026 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J550ADS 1PC IN JECTION UNIT ADS 2300H 1PC SC ADS 2300H 84MM INSTALLED ON INJECTION UNIT 1PC PO0016 037 INJECTION MOLDING MACHINE PARTS FOR NJ D C CLAMPING UNIT J550ADS 1PC INJECTIO N UNIT ADS 2300H 1PC SC ADS 2300H 92MM PO0016026 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J550ADS 1PC IN JECTION UNIT ADS 2300H 1PC SC ADS 2300H 84MM INSTALLED ON INJECTION UNIT 1PC PO0016 037 INJECTION MOLDING MACHINE PARTS FOR NJ D C CLAMPING UNIT J550ADS 1PC INJECTIO N UNIT ADS 2300H 1PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1PC HS CODE 8477 .10 EMAIL [email protected] INSTALLED ON INJECTION UNIT 1PC HS CODE 8477 .10 EMAIL [email protected] |
HS 847710 |
2023-07-17 |
2 UNT |
32200KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM J550ADS 140H INJECTION MOLDING MACHINE CLAMP ING UNIT |
HS 847710 |
2023-07-14 |
12 PCS |
31738KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-07-14 |
12 PCS |
31738KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-07-06 |
2 UNT |
2120KG |
INJECTION MOLDING MACHINE PARTS PO0016136 P L INJECTION UNIT SPACER KIT FOR J850ADSW 3900H 2PCS HS CODE 8477.90 EMAIL INJECTION_SAL [email protected] INJECTION MOLDING MACHINE PARTS PO0016136 P L INJECTION UNIT SPACER KIT FOR J850ADSW 3900H 2PCS HS CODE 8477.90 EMAIL INJECTION_SAL [email protected] |
HS 847790 |
2023-06-09 |
1 PKG |
490KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-06-09 |
6 PCS |
26320KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-06-09 |
5 UNT |
95560KG |
J1300AD 5200H INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM INJECTION MOULDING MACHINERY 3 |
HS 847710 |
2023-06-06 |
5 UNT |
95560KG |
J1300AD 5200H INJECTION MOLDING MACHINE 1 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM J1300AD 5200H INJECTION MOLDING MACHINE 2 |
HS 847710 |
2023-05-25 |
12 PCS |
31738KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-05-25 |
12 PCS |
31738KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-05-11 |
12 PCS |
31738KG |
JSW INJECTION MOLDING MACHINE CONPLETE SETJSW INJECTION MOLDING MACHINE CONPLETE SETJSW INJECTION MOLDING MACHINE CONPLETE SETJSW INJECTION MOLDING MACHINE CONPLETE SET |
HS 847710 |
2023-05-10 |
4 CAS |
11020KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-05-05 |
1 PKG |
358KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-04-27 |
1 PKG |
148KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-04-21 |
1 CAS |
900KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2023-04-17 |
5 UNT |
103820KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM INJECTION UNIT INJECTION UNIT INJECTION UNIT J1300AD 5200H INJECTION MOLDING MACHINE |
HS 847710 |
2023-04-15 |
1 PKG |
1520KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-04-15 |
1 CAS |
1470KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2023-04-11 |
4 CAS |
100000KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-04-07 |
4 PCS |
11798KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-04-07 |
18 PKG |
37718KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-03-31 |
1 PKG |
1300KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-03-25 |
4 CAS |
12550KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-03-25 |
4 CAS |
12550KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-03-17 |
2 PKG |
427KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-03-09 |
1 PKG |
115KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-03-09 |
1 PKG |
130KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-03-09 |
1 PKG |
114KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-03-09 |
3 PKG |
6133KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-02-27 |
2 UNT |
2120KG |
INJECTION MOLDING MACHINE PARTS PO0015696 P L INJECTION UNIT SPACER KIT FOR J850ADSW 3900H 2PCS HS CODE 8477.90 EMAIL INJECTION_S [email protected] INJECTION MOLDING MACHINE PARTS PO0015696 P L INJECTION UNIT SPACER KIT FOR J850ADSW 3900H 2PCS HS CODE 8477.90 EMAIL INJECTION_S [email protected] |
HS 847790 |
2023-02-24 |
2 CAS |
50000KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-02-24 |
1 PKG |
222KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-02-24 |
1 PKG |
287KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-02-24 |
16 PKG |
16654KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-02-24 |
1 PKG |
222KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-02-24 |
1 PKG |
287KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-02-24 |
16 PKG |
16654KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-02-17 |
22 PKG |
17003KG |
JSW INJECTION MOLDING MACHINE COMPLETE SETJSW INJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2023-02-17 |
4 CAS |
21600KG |
JSW INJECTION MOLDING MACHINE COMPKETE SET |
HS 847710 |
2023-02-17 |
1 CAS |
24500KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2023-02-10 |
2 PKG |
385KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2023-02-03 |
1 CAS |
164KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2023-01-26 |
3 CAS |
3750KG |
JSW INJESCTION MOLDING MACHINE COM |
HS 848030 |
2023-01-23 |
2 CAS |
50000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2023-01-13 |
2 CAS |
1067KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2023-01-13 |
1 CAS |
196KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2023-01-13 |
2 CAS |
1067KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2023-01-13 |
1 CAS |
196KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2023-01-10 |
4 CAS |
16090KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2023-01-10 |
2 CAS |
411KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2023-01-07 |
3 UNT |
11110KG |
INJECTION MOLDING MACHINE PARTS PO0015316 I NJECTION MOLDING MACHINE PARTS FOR NJ DC INJ ECTION UNIT ADS 2300H 1 PC TEST RUN INJECTION UNIT WITHOUT SC SEPARATELY FROM CLAMPING UNIT HS CODE 8477.90 PO0015559 IN JECTION MOLDING MACHINE PARTS FOR NJ DC PL I NJECTION UNIT SPACER KIT 2 PCS J850ADSW 3 INJECTION MOLDING MACHINE PARTS PO0015316 I NJECTION MOLDING MACHINE PARTS FOR NJ DC INJ ECTION UNIT ADS 2300H 1 PC TEST RUN INJECTION UNIT WITHOUT SC SEPARATELY FROM CLAMPING UNIT HS CODE 8477.90 PO0015559 IN JECTION MOLDING MACHINE PARTS FOR NJ DC PL I NJECTION UNIT SPACER KIT 2 PCS J850ADSW 3 INJECTION MOLDING MACHINE PARTS PO0015316 I NJECTION MOLDING MACHINE PARTS FOR NJ DC INJ ECTION UNIT ADS 2300H 1 PC TEST RUN INJECTION UNIT WITHOUT SC SEPARATELY FROM CLAMPING UNIT HS CODE 8477.90 PO0015559 IN JECTION MOLDING MACHINE PARTS FOR NJ DC PL I NJECTION UNIT SPACER KIT 2 PCS J850ADSW 3 100H K1M78F HS CODE 8477.90 ATTN. MS.AI KO FUKAI EMAIL INJECTION_SALES @JSWAMERICA. COM 100H K1M78F HS CODE 8477.90 ATTN. MS.AI KO FUKAI EMAIL INJECTION_SALES @JSWAMERICA. COM 100H K1M78F HS CODE 8477.90 ATTN. MS.AI KO FUKAI EMAIL INJECTION_SALES @JSWAMERICA. COM |
HS 847790 |
2023-01-07 |
4 UNT |
71548KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 ATTN MS.AIKO FUKAI E MAIL [email protected] JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 ATTN MS.AIKO FUKAI E MAIL [email protected] J10000AD 5200H MM22 2468 1 J10000AD 5200H MM22 2468 |
HS 847710 |
2022-12-22 |
1 CAS |
120KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-12-22 |
2 CAS |
149KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-12-22 |
1 CAS |
391KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-12-22 |
1 CAS |
120KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-12-22 |
2 CAS |
149KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-12-22 |
1 CAS |
391KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-12-11 |
1 CAS |
15100KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2022-12-11 |
1 CAS |
4700KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2022-12-11 |
3 CAS |
5804KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2022-12-04 |
1 CAS |
25600KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2022-12-04 |
10 CAS |
152800KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2022-12-04 |
3 CAS |
12520KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2022-12-02 |
12 PKG |
21732KG |
INJECTION MOLDING MACHINE COMPLETE SETINJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2022-11-28 |
2 CAS |
50000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS |
HS 847710 |
2022-11-23 |
1 CAS |
480KG |
MACHINERY FOR MOLDING OR RETREATED PNEUMATIC TIRES OR FORMING INNER TUBES |
HS 847751 |
2022-11-23 |
1 CAS |
480KG |
MACHINERY FOR MOLDING OR RETREATED PNEUMATIC TIRES OR FORMING INNER TUBES |
HS 847751 |
2022-11-21 |
6 CAS |
21200KG |
JJSW INJECTION MOLDING MACHINE COMP |
HS 847710 |
2022-11-16 |
1 CAS |
110KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-11-16 |
1 CAS |
103KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-11-16 |
1 CAS |
110KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-11-16 |
1 CAS |
103KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-11-02 |
2 CAS |
977KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-11-02 |
1 CAS |
673KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-10-25 |
7 CAS |
3855KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-10-25 |
7 CAS |
3855KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-10-19 |
6 CAS |
31200KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2022-10-17 |
1 UNT |
10320KG |
INJECTION MOLDING MACHINE PARTS PO0014891 I NJECTION MOLDING MACHINE PARTS FOR NJ DC INJ ECTION UNIT ADS 2300H 1PC SC ADS 230 0H 84MM 1PC INSTALLED ON INJECTION UNIT HS CODE 8477.90 EMAIL INJEC [email protected] |
HS 847790 |
2022-10-07 |
2 CAS |
2620KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-10-07 |
2 CAS |
2620KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-09-24 |
1 CAS |
18400KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2022-09-24 |
9 CAS |
63000KG |
JSW INJECTIONMOLDING MACHINE |
HS 845230 |
2022-09-24 |
3 CAS |
3665KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2022-09-20 |
1 CAS |
172KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-31 |
1 CAS |
846KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-31 |
2 CAS |
2420KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-08-31 |
1 CAS |
846KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-31 |
2 CAS |
2420KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2022-08-22 |
1 CAS |
641KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-22 |
7 CAS |
419KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-22 |
1 CAS |
641KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-22 |
7 CAS |
419KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-22 |
7 CAS |
419KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-22 |
1 CAS |
641KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-21 |
15 UNT |
19255KG |
VACCUM PUMP FEEDER FEEDER HYDRAULIC OIL UNIT CONTROL PANEL MAIN MOTOR CONTROL PANE OP CCW UNIT HOPPER TWIN SCREW EXTRUDER TEX54ALPHA3 1SET PO NO. 4500016731 REF.98 2108 CARGO RECEIVER MITSUBISHI CHEMICAL AMERICA INC. 2001 HOOD ROAD GREER SC 29650 1014 USA TEL 864 879 5 520 CONTACT JESSE BECK LINDA_CASTILLO@M CHEM .COM AND DANNY_PHILLIPS@M PETFILM.COM HS CO DE PELLETIZER WATER BATH CLASSIFIER PELLET COOLER PELLET COOLER WAX BLENDER TEX54 III 52 5BW 5V EXTRUDER |
HS 262060 |
2022-08-09 |
1 CAS |
2450KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-09 |
1 CAS |
250KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-09 |
1 PKG |
270KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-08-09 |
1 PKG |
170KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-08-09 |
3 CAS |
2970KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-09 |
3 CAS |
2970KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-09 |
1 CAS |
2450KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-09 |
1 CAS |
250KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-08-09 |
1 PKG |
270KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-08-09 |
1 PKG |
170KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-07-29 |
1 CAS |
2450KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-07-29 |
1 CAS |
250KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-07-29 |
1 PKG |
270KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-07-29 |
1 PKG |
170KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-07-29 |
3 CAS |
2970KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-07-07 |
1 CAS |
174KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-07-07 |
1 CAS |
660KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-07-07 |
1 CAS |
174KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-07-07 |
1 CAS |
660KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-06-09 |
3 PKG |
1230KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-06-09 |
1 CAS |
410KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-06-07 |
4 UNT |
66640KG |
J550AD 2300H INJECTION MOULDING MACHINERY J550AD 2300H INJECTION MOULDING MACHINERY JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM |
HS 847710 |
2022-06-01 |
4 UNT |
81120KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM J650ADS 14450 AND PO 14451 INJECTION MOLDING MACHINE J650ADS 14450 AND PO 14451 INJECTION MOLDING MACHINE |
HS 847710 |
2022-06-01 |
6 UNT |
114540KG |
2 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY PO0014267 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J550ADS 1 PC INJECTION UNIT ADS 2300H 1 PC S C ADS 2300H 84MM INSTALLED ON INJECTION UNIT 1 PC PO0014268 INJECTION MOLDING MACHINE P ARTS FOR NJ DC CLAMPING UNIT J650ADS INJECTION UNIT ADS 3100H SC ADS 3100 H 92MM INSTALLED ON INJECTION UNIT PO001426 9 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS INJECTION UNIT ADS 3 100H SC ADS 3100H 92MM INSTALLED ON INJECT ION UNIT HS CODE 8477.90 ATTN. MS.AIKO FUK AI EMAIL [email protected] |
HS 847790 |
2022-05-19 |
10 UNT |
72380KG |
INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2022-05-19 |
1 UNT |
5520KG |
PO0014545 JSW INJECTION MOLDING MACHINE COM PLETE SET WITH STANDARD ACCESSORIES FOR THE RMOPLASTICS CLAMPING FORCE 100 METRIC TON M ODEL J100ADS 180U 1 SET HS CODE 8477.10 EMAIL [email protected] |
HS 847710 |
2022-05-18 |
6 UNT |
120440KG |
INJECTION MOLDING MACHINE PARTS FOR NJ DC 9 PCS HS CODE 8477.90 EMAIL INJECTION_SALES @JSWAMERICA.COM INJECTION MOLDING MACHINE PARTS FOR NJ DC 9 PCS HS CODE 8477.90 EMAIL INJECTION_SALES @JSWAMERICA.COM INJECTION MOLDING MACHINE PARTS FOR NJ DC 9 PCS HS CODE 8477.90 EMAIL INJECTION_SALES @JSWAMERICA.COM MM21 3880 3881 3882 INJECTION MOLDING MACHINE MM21 3880 3881 3882 INJECTION MOLDING MACHINE MM21 3880 3881 3882 INJECTION MOLDING MACHINE |
HS 847790 |
2022-05-12 |
1 PKG |
990KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-05-12 |
3 PKG |
1596KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-05-12 |
1 PKG |
990KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-05-12 |
3 PKG |
1596KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-05-07 |
4 UNT |
100000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2022-04-27 |
1 CAS |
1260KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-04-27 |
1 CAS |
353KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-04-27 |
1 CAS |
1260KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-04-27 |
1 CAS |
353KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-04-13 |
3 UNT |
64000KG |
INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 3 |
HS 847710 |
2022-04-13 |
1 UNT |
20300KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2022-04-13 |
8 UNT |
164280KG |
INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY PO0013711 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J650ADS 1 PC I NJECTION UNIT ADS 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC PO0 013970 INJECTION MOLDING MACHINE PARTS FOR N J DC CLAMPING UNIT J650ADS 1 PC INJE CTION UNIT ADS 2300H 1 PC SC ADS 2300H 92 PO0013711 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J650ADS 1 PC I NJECTION UNIT ADS 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC PO0 013970 INJECTION MOLDING MACHINE PARTS FOR N J DC CLAMPING UNIT J650ADS 1 PC INJE CTION UNIT ADS 2300H 1 PC SC ADS 2300H 92 PO0013711 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J650ADS 1 PC I NJECTION UNIT ADS 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC PO0 013970 INJECTION MOLDING MACHINE PARTS FOR N J DC CLAMPING UNIT J650ADS 1 PC INJE CTION UNIT ADS 2300H 1 PC SC ADS 2300H 92 PO0013711 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J650ADS 1 PC I NJECTION UNIT ADS 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC PO0 013970 INJECTION MOLDING MACHINE PARTS FOR N J DC CLAMPING UNIT J650ADS 1 PC INJE CTION UNIT ADS 2300H 1 PC SC ADS 2300H 92 MM INSTALLED ON INJECTION UNIT 1PC PO001397 1 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 3100H 1 PC SC ADS 3100H 92MM I NSTALLED ON INJECTION UNIT 1 PC PO0013972 I NJECTION MOLDING MACHINE PARTS FOR NJ DC C LAMPING UNIT J650ADS 1 PC INJECTION U NIT ADS 3900H 1 PC SC ADS 3900H 110MM IN STALLED ON INJECTION UNIT 1 PC HS CODE 847 7.90 EMAIL [email protected] MM INSTALLED ON INJECTION UNIT 1PC PO001397 1 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 3100H 1 PC SC ADS 3100H 92MM I NSTALLED ON INJECTION UNIT 1 PC PO0013972 I NJECTION MOLDING MACHINE PARTS FOR NJ DC C LAMPING UNIT J650ADS 1 PC INJECTION U NIT ADS 3900H 1 PC SC ADS 3900H 110MM IN STALLED ON INJECTION UNIT 1 PC HS CODE 847 7.90 EMAIL [email protected] MM INSTALLED ON INJECTION UNIT 1PC PO001397 1 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 3100H 1 PC SC ADS 3100H 92MM I NSTALLED ON INJECTION UNIT 1 PC PO0013972 I NJECTION MOLDING MACHINE PARTS FOR NJ DC C LAMPING UNIT J650ADS 1 PC INJECTION U NIT ADS 3900H 1 PC SC ADS 3900H 110MM IN STALLED ON INJECTION UNIT 1 PC HS CODE 847 7.90 EMAIL [email protected] MM INSTALLED ON INJECTION UNIT 1PC PO001397 1 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 3100H 1 PC SC ADS 3100H 92MM I NSTALLED ON INJECTION UNIT 1 PC PO0013972 I NJECTION MOLDING MACHINE PARTS FOR NJ DC C LAMPING UNIT J650ADS 1 PC INJECTION U NIT ADS 3900H 1 PC SC ADS 3900H 110MM IN STALLED ON INJECTION UNIT 1 PC HS CODE 847 7.90 EMAIL [email protected] |
HS 847790 |
2022-04-12 |
2 CAS |
2000KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-04-12 |
2 CAS |
2000KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-03-29 |
1 CAS |
164KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-03-29 |
1 CAS |
164KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-03-27 |
4 UNT |
93700KG |
INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 1 |
HS 847710 |
2022-03-26 |
2 UNT |
30200KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2022-03-26 |
14 UNT |
347820KG |
2 J650ADS 3100H INJECTION MOULDING MACHINERY 2 J650ADS 3100H INJECTION MOULDING MACHINERY 2 J650ADS 3100H INJECTION MOULDING MACHINERY J650ADS 3100H INJECTION MOULDING MACHINERY J650ADS 3100H INJECTION MOULDING MACHINERY J650ADS 3100H INJECTION MOULDING MACHINERY J650ADS 3100H INJECTION MOULDING MACHINERY J650ADS 3100H INJECTION MOULDING MACHINERY J650ADS 3100H INJECTION MOULDING MACHINERY J650ADS 3100H INJECTION MOULDING MACHINERY INJECTION MOLDING MACHINE PARTS FOR NJ DC 21 PCS HS CODE 8477.90 EMAIL INJECTION_S [email protected] INJECTION MOLDING MACHINE PARTS FOR NJ DC 21 PCS HS CODE 8477.90 EMAIL INJECTION_S [email protected] INJECTION MOLDING MACHINE PARTS FOR NJ DC 21 PCS HS CODE 8477.90 EMAIL INJECTION_S [email protected] INJECTION MOLDING MACHINE PARTS FOR NJ DC 21 PCS HS CODE 8477.90 EMAIL INJECTION_S [email protected] |
HS 847790 |
2022-03-25 |
2 CAS |
2900KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-03-25 |
2 CAS |
1930KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-03-25 |
1 CAS |
7270KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-03-25 |
1 CAS |
1330KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2022-03-22 |
4 UNT |
24520KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2022-03-22 |
2 UNT |
6720KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2022-03-08 |
1 UNT |
20300KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2022-01-15 |
5 UNT |
96080KG |
INJECTION MOULDING MACHINERY 1 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM INJECTION MOULDING MACHINERY 2 |
HS 847710 |
2022-01-06 |
1 CAS |
247KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2022-01-06 |
4 UNT |
82760KG |
INJECTION MOULDING MACHINERY MM21 3862 INJECTION MOULDING MACHINERY MM21 3862 PO0013618 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J650ADS 1PC INJECTION UNIT ADS 3100H 1PC SC ADS 3100H 92MM IN STALLED ON INJECTION UNIT 1PC PO0013710 IN JECTION MOLDING MACHINE PARTS FOR NJ DC CLAM PING UNIT J650ADS 1 PO0013618 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J650ADS 1PC INJECTION UNIT ADS 3100H 1PC SC ADS 3100H 92MM IN STALLED ON INJECTION UNIT 1PC PO0013710 IN JECTION MOLDING MACHINE PARTS FOR NJ DC CLAM PING UNIT J650ADS 1 PC INJECTION UNIT ADS 3900H 1PC SC ADS 3900H 100MM INSTALLED ON I NJECTION UNIT 1PC HS CODE 8477.90 EMAIL I [email protected] PC INJECTION UNIT ADS 3900H 1PC SC ADS 3900H 100MM INSTALLED ON I NJECTION UNIT 1PC HS CODE 8477.90 EMAIL I [email protected] |
HS 847790 |
2021-12-27 |
5 UNT |
115100KG |
INJECTION MOULDING MACHINERY 1 INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-12-27 |
4 UNT |
42525KG |
INJECTION MOLDING MACHINE PARTS FOR NJ DC TE ST RUN CLAMPING UNIT SEPARATELY FROM 1 PC INJECTION UNIT TEST RUN INJEC TION UNIT WITH SC SEPARATELY FROM 1PC CLAM PING UNIT SC ADS 3900H 100MM INSTALLED ON I NJECTION UNIT 1PC PO0014232 INJECTION M OLDING MACHINE PARTS FOR NJ DC REPAIR PARTS INJECTION MOLDING MACHINE PARTS FOR NJ DC TE ST RUN CLAMPING UNIT SEPARATELY FROM 1 PC INJECTION UNIT TEST RUN INJEC TION UNIT WITH SC SEPARATELY FROM 1PC CLAM PING UNIT SC ADS 3900H 100MM INSTALLED ON I NJECTION UNIT 1PC PO0014232 INJECTION M OLDING MACHINE PARTS FOR NJ DC REPAIR PARTS INJECTION MOLDING MACHINE PARTS FOR NJ DC TE ST RUN CLAMPING UNIT SEPARATELY FROM 1 PC INJECTION UNIT TEST RUN INJEC TION UNIT WITH SC SEPARATELY FROM 1PC CLAM PING UNIT SC ADS 3900H 100MM INSTALLED ON I NJECTION UNIT 1PC PO0014232 INJECTION M OLDING MACHINE PARTS FOR NJ DC REPAIR PARTS INJECTION MOULDING MACHINERY MM21 3865 3866 FOR J550ADS CLAMPING UNIT 1SET HS CODE 8477.90 EMAIL INJECTION_SALES @JSWAMERICA.COM FOR J550ADS CLAMPING UNIT 1SET HS CODE 8477.90 EMAIL INJECTION_SALES @JSWAMERICA.COM FOR J550ADS CLAMPING UNIT 1SET HS CODE 8477.90 EMAIL INJECTION_SALES @JSWAMERICA.COM |
HS 847790 |
2021-12-21 |
3 UNT |
26100KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-12-21 |
1 UNT |
26440KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 450 METRIC TON MODEL J450ADS 1400H 1 SET HS CODE 8477.10 EM AIL [email protected] |
HS 847710 |
2021-12-21 |
14 UNT |
220385KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM INJECTION MOULDING MACHINERY 5 INJECTION MOULDING MACHINERY 4 INJECTION MOULDING MACHINERY 3 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 1 |
HS 847710 |
2021-12-15 |
4 UNT |
60400KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-12-15 |
2 UNT |
71400KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM |
HS 847710 |
2021-11-27 |
1 UNT |
8900KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-11-18 |
12 UNT |
154420KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM INJECTION MOULDING MACHINERY 4 INJECTION MOULDING MACHINERY 3 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 1 J1800AD 9500HINJECTION MOULDING MACHINERY J1800AD 9500HINJECTION MOULDING MACHINERY |
HS 847710 |
2021-11-18 |
1 UNT |
19600KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 350 METRIC TON MODEL J350AD S 460H 1 SET SERIAL NO. 22082DE90E90 CLAM PING UNIT 22082GG46G46 INJECTION UNIT HS CO DE 8477.10 |
HS 847710 |
2021-11-18 |
2 UNT |
14220KG |
INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-11-18 |
2 UNT |
17400KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 2 |
HS 847710 |
2021-11-18 |
5 UNT |
26240KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-11-18 |
6 UNT |
44800KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 3 6 INJECTION MOULDING MACHINERY 3 6 INJECTION MOULDING MACHINERY 3 6 INJECTION MOULDING MACHINERY 3 6 |
HS 847710 |
2021-10-30 |
12 UNT |
154420KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM INJECTION MOULDING MACHINERY 4 INJECTION MOULDING MACHINERY 3 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 1 J1800AD 9500H INJECTION MOLDING MACHINE J1800AD 9500H INJECTION MOLDING MACHINE |
HS 847710 |
2021-10-26 |
1 CAS |
762KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-10-26 |
1 CAS |
361KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-10-26 |
6 PKG |
15782KG |
JSW INJECTION MOLDING MACHINEJSW INJECTION MOLDING MACHINE |
HS 847710 |
2021-10-19 |
5 UNT |
97220KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM INJECTION MOULDING MACHINERY 1 J450ADS 1400H INJECTION MOULDING MACHINERY |
HS 847710 |
2021-10-19 |
1 UNT |
26440KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPL ASTICS CLAMPING FORCE 450 METRIC TON MODEL J450ADS 1400H 1 SET HS CODE 8477.10 FINAL DESTINATION II STANLEY 1500 HILL BRADY RD BATTLE CREEK MI 49037 U.S.A. EMAIL INJE [email protected] |
HS 847710 |
2021-10-19 |
6 UNT |
76900KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-10-19 |
5 UNT |
43100KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-10-17 |
1 UNT |
25300KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-10-17 |
4 UNT |
21200KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-10-11 |
1 UNT |
25000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-10-11 |
4 UNT |
100780KG |
PO0013205 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J650ADS 1 PC I NJECTION UNIT ADS 3100H 1 PC SC ADS 3100H 100MM INSTALLED ON INJECTION UNIT 1 PC PO0 013206 INJECTION MOLDING MACHINE PARTS FOR N J DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 11 J850ADW 5200H 3575 3876 INJECTION MOULDING MACHINERY 1 J850ADW 5200H PARTS 0MM INSTALLED ON INJECTION UNIT 1 PC HS CO DE 8477.90 EMAIL INJECTION_SALES@JSWAMERICA .COM |
HS 847790 |
2021-10-11 |
2 UNT |
35620KG |
J550AD 2300H INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM |
HS 847710 |
2021-10-11 |
2 UNT |
35620KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM J550AD 2300H INJECTON MOLDING MACHINE |
HS 847710 |
2021-10-11 |
2 UNT |
41600KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM J650AD 3100HMM20 2128 INJECTION MOLDING MACH INERY |
HS 847710 |
2021-10-11 |
2 UNT |
4000KG |
INJECTION MOLDING MACHINE PARTS FOR NJ DC PL INJECTION UNIT SPACER KIT J850ADSW 3100H 2 PCS PL INJECTION UNIT SPACER KIT J85 0ADSW 3900H 2 PCS PL INJECTION UNIT ADVANCE STOPPER J550ADS 3100H 2 PCS PL INJE CTION UNIT ADVANCE STOPPER J650ADS 2300H 2 PCS HS CODE 8477.90 EMAIL INJECTION_SALES@JS PARTS FOR INJECTIN MOLDING MACHINE WAMERICA.COM |
HS 847790 |
2021-10-08 |
1 CAS |
102KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-10-08 |
1 CAS |
556KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-10-08 |
2 CAS |
2767KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-10-08 |
2 PKG |
293KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-10-04 |
1 UNT |
25000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-10-04 |
4 UNT |
93640KG |
J550ADS NO FORK J550ADS 2300H MM20 3851 NO FORK J850ADW 5200H NO FORK PO0013208 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J850ADSW 1PC INJ ECTION UNIT ADS 5200H 1PC SC ADS 5200H 1 20MM INSTALLED ON INJECTION UNIT 1PC PO0013 357 INJECTION MOLDING MACHINE PARTS FOR NJ D C CLAMPING UNIT J550ADS 1PC INJECT ION UNIT ADS 2300H 1PC SC ADS 2300H 84M M INSTALLED ON INJECTION UNIT 1PC HS CODE 8477.90 EMAIL [email protected] OM |
HS 847790 |
2021-10-04 |
13 UNT |
347300KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM INJECTION MOULDING MACHINERY 4 INJECTION MOULDING MACHINERY 3 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 1 INJECTION MOULDING MACHINERY 6 INJECTION MOULDING MACHINERY 5 |
HS 847710 |
2021-09-30 |
2 UNT |
20420KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-09-30 |
1 UNT |
6920KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-09-30 |
1 UNT |
24000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-09-29 |
6 UNT |
142980KG |
J850ADW 5200H NO FORK J850ADW 5200H NO FORK 1 INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UN IT ADS 3100H 1PC SC ADS 3100H 92MM INST ALLED ON INJECTION UNIT 1PC PO0013359 INJE CTION MOLDING MACHINE PARTS FOR NJ DC CLAMP ING UNIT J850ADSW 1PC INJECTION UNIT A DS 5200H 1PC SC ADS 5200H 110MM INSTAL J650ADS 3900H NO FORK J650ADS 3100H MM21 3852 3853 3857 J650ADS 3900H NO FORK LED ON INJECTION UNIT 1PC PO0013550 INJECT ION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1PC INJECTION UNIT AD S 3900H 1PC SC ADS 3900H 110MM INSTALL ED ON INJECTION UNIT 1PC HS CODE 8477.90 EMAIL [email protected] |
HS 847790 |
2021-09-28 |
4 UNT |
55800KG |
INJECTION MOULDING MACHINERY 4 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 3 |
HS 847710 |
2021-09-20 |
6 PKG |
12804KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2021-09-18 |
4 UNT |
35700KG |
INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 3 INJECTION MOULDING MACHINERY 4 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-09-11 |
1 UNT |
25000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-09-10 |
1 CAS |
362KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-09-10 |
1 CAS |
600KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-09-10 |
1 CAS |
600KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-09-10 |
1 CAS |
362KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-09-01 |
8 UNT |
105800KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-09-01 |
1 UNT |
5300KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-08-25 |
1 CAS |
151KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2021-08-25 |
1 CAS |
151KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2021-08-24 |
4 UNT |
84000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM J650ADS 3100H INJECTION MOLDING MACHINERY J650ADS 3100H INJECTION MOLDING MACHINERY |
HS 847710 |
2021-08-24 |
4 UNT |
49760KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-08-24 |
9 UNT |
94120KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-08-24 |
2 UNT |
27020KG |
INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-08-24 |
2 UNT |
3340KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 2 |
HS 847710 |
2021-08-24 |
2 PKG |
46700KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS |
HS 847710 |
2021-08-24 |
2 PKG |
42000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS |
HS 847710 |
2021-08-24 |
5 PKG |
97600KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS |
HS 847710 |
2021-08-16 |
8 UNT |
116500KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-08-16 |
2 UNT |
42200KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 2 |
HS 847710 |
2021-08-16 |
2 UNT |
42200KG |
INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION U NIT ADS 3900H 1 PC SC ADS 3900H 110MM I NSTALLED ON INJECTION UNIT 1PC HS CODE 8477 .90 EMAIL [email protected] INJECTION MOULDING MACHINERY 1 |
HS 847790 |
2021-08-16 |
2 UNT |
35620KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM J550AD 2300H INJECTION MOLDING MACHINE |
HS 847710 |
2021-08-16 |
5 UNT |
106120KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES@ JSWAMERICA.COM INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 1 |
HS 847710 |
2021-08-13 |
1 UNT |
25000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-08-13 |
2 UNT |
41600KG |
J650AD 3100H INJECTION MOLDING MACHINERY JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALE [email protected] |
HS 847710 |
2021-08-13 |
6 UNT |
95068KG |
PO0013169 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J850ADSW 1 PC INJECT ION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC PO0013204 INJECTION MOLDING MACHINE PARTS FOR NJ DC C LAMPING UNIT J550ADS 1 PC INJECTION UNIT AD S 2300H 1 PC SC ADS 2300H 92MM INSTALLED O PO0013169 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J850ADSW 1 PC INJECT ION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC PO0013204 INJECTION MOLDING MACHINE PARTS FOR NJ DC C LAMPING UNIT J550ADS 1 PC INJECTION UNIT AD S 2300H 1 PC SC ADS 2300H 92MM INSTALLED O PO0013169 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J850ADSW 1 PC INJECT ION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC PO0013204 INJECTION MOLDING MACHINE PARTS FOR NJ DC C LAMPING UNIT J550ADS 1 PC INJECTION UNIT AD S 2300H 1 PC SC ADS 2300H 92MM INSTALLED O PO0013169 INJECTION MOLDING MACHINE PARTS FO R NJ DC CLAMPING UNIT J850ADSW 1 PC INJECT ION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC PO0013204 INJECTION MOLDING MACHINE PARTS FOR NJ DC C LAMPING UNIT J550ADS 1 PC INJECTION UNIT AD S 2300H 1 PC SC ADS 2300H 92MM INSTALLED O J850ADW 5200H J850ADW 5200I INJECTION MOLDING N INJECTION UNIT 1 PC SC ADS 2300H 84MM PAC KED SEPARATELY SPARE PARTS 1 PC HS CODE 847 7.90 EMAIL [email protected] N INJECTION UNIT 1 PC SC ADS 2300H 84MM PAC KED SEPARATELY SPARE PARTS 1 PC HS CODE 847 7.90 EMAIL [email protected] N INJECTION UNIT 1 PC SC ADS 2300H 84MM PAC KED SEPARATELY SPARE PARTS 1 PC HS CODE 847 7.90 EMAIL [email protected] N INJECTION UNIT 1 PC SC ADS 2300H 84MM PAC KED SEPARATELY SPARE PARTS 1 PC HS CODE 847 7.90 EMAIL [email protected] |
HS 847790 |
2021-08-10 |
2 UNT |
62520KG |
J850ADW 3900H INJECTION MOLDING MACHINERY JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM |
HS 847710 |
2021-08-10 |
10 UNT |
137702KG |
INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J550ADS 1PC INJECTION UNIT ADS 2300H 1PC SC ADS 2300H 84MM INSTALLED ON INJECTION UNIT 1PC SC ADS 2300H 92MM PACKE D SEPARATELY SPARE PARTS 1PC PO0013167 IN JECTION MOLDING MACHINE PARTS FOR NJ DC CLAM PING UNIT J850ADSW 1PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J550ADS 1PC INJECTION UNIT ADS 2300H 1PC SC ADS 2300H 84MM INSTALLED ON INJECTION UNIT 1PC SC ADS 2300H 92MM PACKE D SEPARATELY SPARE PARTS 1PC PO0013167 IN JECTION MOLDING MACHINE PARTS FOR NJ DC CLAM PING UNIT J850ADSW 1PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J550ADS 1PC INJECTION UNIT ADS 2300H 1PC SC ADS 2300H 84MM INSTALLED ON INJECTION UNIT 1PC SC ADS 2300H 92MM PACKE D SEPARATELY SPARE PARTS 1PC PO0013167 IN JECTION MOLDING MACHINE PARTS FOR NJ DC CLAM PING UNIT J850ADSW 1PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J550ADS 1PC INJECTION UNIT ADS 2300H 1PC SC ADS 2300H 84MM INSTALLED ON INJECTION UNIT 1PC SC ADS 2300H 92MM PACKE D SEPARATELY SPARE PARTS 1PC PO0013167 IN JECTION MOLDING MACHINE PARTS FOR NJ DC CLAM PING UNIT J850ADSW 1PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J550ADS 1PC INJECTION UNIT ADS 2300H 1PC SC ADS 2300H 84MM INSTALLED ON INJECTION UNIT 1PC SC ADS 2300H 92MM PACKE D SEPARATELY SPARE PARTS 1PC PO0013167 IN JECTION MOLDING MACHINE PARTS FOR NJ DC CLAM PING UNIT J850ADSW 1PC INJECTION UNIT ADS J650ADS INJECTION MOULDING MACHINERY J850ADW 5200H INJECTION MOULDING MACHINERY J850ADW 5200H INJECTION MOULDING MACHINERY J850ADW INJECTION MOULDING MACHINERY J550ADS INJECTION MOLDING MACHINE 5200H 1PC SC ADS 5200H 110MM INSTALLED ON INJECTION UNIT 1PC SC ADS 5200H 120MM PAC KED SEPARATELY SPARE PARTS 1PC PO0013168 INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT ADS 3100H 1PC SC ADS 3100H 92MM INSTALLED ON INJECTION UNIT 1PC HS CODE 8477.90 EMAIL [email protected] 5200H 1PC SC ADS 5200H 110MM INSTALLED ON INJECTION UNIT 1PC SC ADS 5200H 120MM PAC KED SEPARATELY SPARE PARTS 1PC PO0013168 INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT ADS 3100H 1PC SC ADS 3100H 92MM INSTALLED ON INJECTION UNIT 1PC HS CODE 8477.90 EMAIL [email protected] 5200H 1PC SC ADS 5200H 110MM INSTALLED ON INJECTION UNIT 1PC SC ADS 5200H 120MM PAC KED SEPARATELY SPARE PARTS 1PC PO0013168 INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT ADS 3100H 1PC SC ADS 3100H 92MM INSTALLED ON INJECTION UNIT 1PC HS CODE 8477.90 EMAIL [email protected] 5200H 1PC SC ADS 5200H 110MM INSTALLED ON INJECTION UNIT 1PC SC ADS 5200H 120MM PAC KED SEPARATELY SPARE PARTS 1PC PO0013168 INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT ADS 3100H 1PC SC ADS 3100H 92MM INSTALLED ON INJECTION UNIT 1PC HS CODE 8477.90 EMAIL [email protected] 5200H 1PC SC ADS 5200H 110MM INSTALLED ON INJECTION UNIT 1PC SC ADS 5200H 120MM PAC KED SEPARATELY SPARE PARTS 1PC PO0013168 INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT ADS 3100H 1PC SC ADS 3100H 92MM INSTALLED ON INJECTION UNIT 1PC HS CODE 8477.90 EMAIL [email protected] |
HS 847790 |
2021-08-06 |
2 UNT |
50000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 2 |
HS 847710 |
2021-08-02 |
3 PKG |
11221KG |
JSW INJECTION MOLDING MACHINE COMPLETE |
HS 847710 |
2021-07-26 |
3 UNT |
38400KG |
INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 3 |
HS 847710 |
2021-07-25 |
2 UNT |
45300KG |
J450ADS 1400H 1 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-07-25 |
3 UNT |
75000KG |
INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 3 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-07-25 |
6 UNT |
102505KG |
INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J850ADSW 1PC INJECTION UNIT ADS 5200H 1PC SC ADS 5200H 110MM INSTALLED ON INJECTION UNIT 1PC PO0013166 INJECTION MOL DING MACHINE PARTS FOR NJ DC CLAMPING UNIT J 650ADS 1PC INJECTION UNIT ADS 3100H 1PC S C ADS 3100H 100MM INSTALLED ON INJECTION UNI INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J850ADSW 1PC INJECTION UNIT ADS 5200H 1PC SC ADS 5200H 110MM INSTALLED ON INJECTION UNIT 1PC PO0013166 INJECTION MOL DING MACHINE PARTS FOR NJ DC CLAMPING UNIT J 650ADS 1PC INJECTION UNIT ADS 3100H 1PC S C ADS 3100H 100MM INSTALLED ON INJECTION UNI INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J850ADSW 1PC INJECTION UNIT ADS 5200H 1PC SC ADS 5200H 110MM INSTALLED ON INJECTION UNIT 1PC PO0013166 INJECTION MOL DING MACHINE PARTS FOR NJ DC CLAMPING UNIT J 650ADS 1PC INJECTION UNIT ADS 3100H 1PC S C ADS 3100H 100MM INSTALLED ON INJECTION UNI INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J850ADSW 1PC INJECTION UNIT ADS 5200H 1PC SC ADS 5200H 110MM INSTALLED ON INJECTION UNIT 1PC PO0013166 INJECTION MOL DING MACHINE PARTS FOR NJ DC CLAMPING UNIT J 650ADS 1PC INJECTION UNIT ADS 3100H 1PC S C ADS 3100H 100MM INSTALLED ON INJECTION UNI INJECTION MOULDING MACHINERY 1 INJECTION MOULDING MACHINERY J850ADW T 1PC SC ADS 3100H 92MM PACKED SEPARATELY S PARE PARTS 1PC PO0013503 INJECTION MOLDING MACHINE PARTS FOR NJ DC PL CLEAR PLASTIC MA CHINE COVER FOR BARE 20PCS HS CODE 8477.90 EMAIL [email protected] T 1PC SC ADS 3100H 92MM PACKED SEPARATELY S PARE PARTS 1PC PO0013503 INJECTION MOLDING MACHINE PARTS FOR NJ DC PL CLEAR PLASTIC MA CHINE COVER FOR BARE 20PCS HS CODE 8477.90 EMAIL [email protected] T 1PC SC ADS 3100H 92MM PACKED SEPARATELY S PARE PARTS 1PC PO0013503 INJECTION MOLDING MACHINE PARTS FOR NJ DC PL CLEAR PLASTIC MA CHINE COVER FOR BARE 20PCS HS CODE 8477.90 EMAIL [email protected] T 1PC SC ADS 3100H 92MM PACKED SEPARATELY S PARE PARTS 1PC PO0013503 INJECTION MOLDING MACHINE PARTS FOR NJ DC PL CLEAR PLASTIC MA CHINE COVER FOR BARE 20PCS HS CODE 8477.90 EMAIL [email protected] |
HS 847790 |
2021-07-24 |
3 PKG |
4210KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED . 3 PACKAGES (1 IPPC SKID (1 PIECE) & 2 CARTONS) THE SAME |
HS 847710 |
2021-07-23 |
1 CAS |
174KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-07-19 |
11 UNT |
173000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-07-19 |
3 UNT |
38400KG |
INJECTION MOULDING MACHINERY 3 INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-07-19 |
9 UNT |
93700KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-07-18 |
3 PKG |
11955KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WI |
HS 847710 |
2021-07-15 |
1 UNT |
18700KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-07-15 |
6 UNT |
96800KG |
INJECTION MOULDING MACHINERY 5 INJECTION MOULDING MACHINERY 2 INJECTION MOULDING MACHINERY 4 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 3 INJECTION MOULDING MACHINERY 6 |
HS 847710 |
2021-07-15 |
2 UNT |
41600KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM J650AD 3100H INJECTION MOLDING MACHINE |
HS 847710 |
2021-07-11 |
3 PKG |
7974KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKID(1 PIECE) & 2 CARTON S) HS CODE:8477.10 FREIGHT PREPAID AS ARRA NGED |
HS 847710 |
2021-07-11 |
9 PKG |
36174KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKIDS(1 PIECE) & 1 CARTON PALLET(1 PIECE) & 1 CARTON) HS CODE:8477.10 FREIGHT PREPAID AS ARRANGED TOTAL: 3 IPPC SKIDS(3 PIECES) & 3 CARTON PALLETS(3 PIECES) & 3 CARTONSJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKIDS(1 PIECE) & 1 CARTON PALLET(1 PIECE) & 1 CARTON)JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKIDS(1 PIECE) & 1 CARTON PALLET(1 PIECE) & 1 CARTON) |
HS 847710 |
2021-07-11 |
12 PKG |
24520KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES(1 IPPC SKID(1 PIECE) & 2 CARTONS)JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES(1 IPPC SKID(1 PIECE) & 2 CARTONS)JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES(1 IPPC SKID(1 PIECE) & 2 CARTONS) HS CODE:8477.10 FREIGHT PREPAID AS ARRANGE DJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES(1 IPPC SKID(1 PIECE) & 2 CARTONS) |
HS 847710 |
2021-07-11 |
14 UNT |
148797KG |
INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1 PC INJECTION UNIT ADS 2300H 1 PC SC ADS 2300H 92MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 2300H 84MM PACK ED SEPARATELY SPARE PARTS 1 PC PO0013161 I NJECTION MOLDING MACHINE PARTS FOR NJ DC CLA MPING UNIT J650ADS 1 PC INJECTION UNIT ADS INJECTION MOULDING MACHINERYMM20 3859 INJECTION MOULDING MACHINERYMM20 3861 INJECTION MOULDING MACHINERY MM20 3860 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] 3900H 1 PC SC ADS 3900H 110MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 3900H 100MM PAC KED SEPARATELY SPARE PARTS 1 PC SC ADS 3900 H 110MM PACKED SEPARATELY SPARE PARTS 1 PC PO0013162 INJECTION MOLDING MACHINE PARTS F OR NJ DC CLAMPING UNIT J850ADSW 1 PC INJEC TION UNIT ADS 5200H 1 PC SC ADS 5200H 120MM INSTALLED ON INJECTION UNIT 1 PC SC ADS 52 00H 110MM PACKED SEPARATELY SPARE PARTS 1 P C HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMA IL [email protected] |
HS 847790 |
2021-07-11 |
2 UNT |
50000KG |
J450ADS 1400H 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-07-10 |
3 PKG |
13734KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2021-07-10 |
3 PKG |
13735KG |
MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED . INSIDE PACKAGE 3 PACKAGES (1 IPPC SKID(1 PIECE) & 1 PLYWOOD PALLET (1 PIECE) & 1 CARTON) |
HS 847710 |
2021-07-08 |
6 PKG |
22441KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKIDS(1 PIECE) & 1 PLYWOODPALLET(1 PIECE) & 1 CARTON)JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKIDS(1 PIECE) & 1 PLYWOODPALLET(1 PIECE) & 1 CARTON) HS CODE:8477.10 FREIGHT PREPAID AS ARRANGED |
HS 847710 |
2021-07-08 |
6 PKG |
24955KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKIDS(1 PIECE) & 1 PLYWOODPALLET(1 PIECE) & 1 CARTON)JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKIDS(1 PIECE) & 1 PLYWOODPALLET(1 PIECE) & 1 CARTON) HS CODE:8477.10 FREIGHT PREPAID AS ARRANGED |
HS 847710 |
2021-07-08 |
6 PKG |
33630KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES(1 IPPC SKIDS(1 PIECE) & 1 PLYWOOD PALLET(1 PIECE) & 1 CARTON)JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES( 1 IPPC SKIDS(1 PIECE) & 1 PLYWOODPALLET(1 PIECE) & 1 CARTON) HS CODE:8477.10 FREIGHT PREPAID AS ARRANGED |
HS 847710 |
2021-07-06 |
1 UNT |
25000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-07-04 |
8 PKG |
3406KG |
INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 SOFTWARE FOR INJECTION MOLDING MACHINE HS CODE 8477.90 FREIGHT PREPAID AS ARRANGED 8PKG=1SKD(1PCS)+3CRT+3CTN+1BAL NAC THE JAPAN STEEL WORKS, LTD. |
HS 847710 |
2021-06-20 |
3 PKG |
7973KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 1 IPPC SKID(1 PIECE) & 2 CARTONS HS CODE:84 77.10 FREIGHT PREPAID AS ARRANGED |
HS 847710 |
2021-06-20 |
3 PKG |
11220KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES(1 IPPC SKIDS(1 PIECE) & 1 PLYWOOD PALLET(1 PIECE) & 1 CARTON) HS CODE:8477.10 FREIGHT PREPAID AS ARRANGED HS CODE:8477.1 0 |
HS 847710 |
2021-06-20 |
1 UNT |
12800KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-06-20 |
4 UNT |
75120KG |
INJECTION MOULDING MACHINERY J1000AD 5200H BED FOR CLAMPING UNIT INJECTION UNIT JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTIC C LAMPING FORCE IN 1000 METRIC TONS MODEL J1 000AD 5200H 1 SET HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM |
HS 847710 |
2021-06-20 |
1 UNT |
12800KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-06-17 |
12 PKG |
18080KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICSJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 FREIGHT PREPAID AS ARRANGE D |
HS 847710 |
2021-06-12 |
8 UNT |
104468KG |
INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY 1 INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT ADS 3100H 1PC SC ADS 3100H 92MM INSTALLED ON INJECTION UNIT 1PC SC ADS 3100H 100MM PACKED SEPARATELY 1PC SPARE PART S PO0013159 INJECTION MOLDING MACHINE PART S FOR NJ DC CLAMPING UNIT J850ADSW 1PC INJECTION UNIT ADS 5200 H 1PC SC ADS 5200H 1 10MM INSTALLED ON INJECTION UNIT 1PC SC AD S 5200H 120MM PACKED SEPARATELY 1 PC SPARE PARTS HS CODE 8477.90 ATTN. M S.AIKO FUKAI EMAIL INJECTION_SALES@JSWAMERIC A.COM |
HS 847790 |
2021-05-29 |
2 UNT |
9600KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY 2 |
HS 847710 |
2021-05-23 |
3 PKG |
13734KG |
INJECTION MOLDING MACHINE |
HS 847710 |
2021-05-22 |
2 UNT |
35400KG |
PRESS MACHINE 2 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-05-04 |
1 CAS |
582KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-05-04 |
1 CAS |
142KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-05-04 |
12 PKG |
18388KG |
INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 12PKG=4SKD(4PCS)+8CTN THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME THE SAMEINJECTION MOLDING MACHINE |
HS 847710 |
2021-05-04 |
5 UNT |
57220KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-05-04 |
2 UNT |
17200KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2021-05-01 |
16 UNT |
181498KG |
PO00012967 PO00012970 P00012970 P00012970 INJECTION MOULDING MACHINERY J550ADS 2300H PO00012811 PO00012811 P00012969 PO00012811 P00012969 P00012811 P00012969 P00012811 P00012969 P00012967 INJECTION MOLDING MACHINE PARTS 56 PCS H S CODE 8477.90 ATTN. MS.AIKO FUKAI EMAIL I [email protected] PO00012969 P00012967 2 INJECTION MOULDING P0012811 P0012969 INJECTION MOULDING P0012811 P0012969 |
HS 847790 |
2021-04-26 |
1 CAS |
180KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-04-26 |
1 CAS |
1480KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-04-26 |
1 CAS |
180KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-04-26 |
1 CAS |
1480KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-04-26 |
1 CAS |
180KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-04-26 |
1 CAS |
1480KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-04-25 |
2 UNT |
42200KG |
INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTIO N UNIT ADS 3900H 1PC SC ADS 3900H 10 0MM 1PC MOUNTING ON INJECT ION UNIT IN SHIPPING HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMAIL INJECTION_SALES@JSWAMER ICA.COM INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTIO N UNIT ADS 3900H 1PC SC ADS 3900H 10 0MM 1PC MOUNTING ON INJECT ION UNIT IN SHIPPING HS CODE 8477.90 ATTN. MS.AIKO FUKAI EMAIL INJECTION_SALES@JSWAMER ICA.COM |
HS 847790 |
2021-04-23 |
8 UNT |
86158KG |
J650ADS 3100H INJECTION MOLDING MACHINE INJECTION MOULDING MACHINERY 1 INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT A DS 3100H 1PC SC ADS 3100H 92MM INSTALLE D ON INJECTION UNIT 1PC SC ADS 3100H 100M M PACKED SEPARATELY 1PC SPARE PARTS P O0012966 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1PC INJECT INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT A DS 3100H 1PC SC ADS 3100H 92MM INSTALLE D ON INJECTION UNIT 1PC SC ADS 3100H 100M M PACKED SEPARATELY 1PC SPARE PARTS P O0012966 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1PC INJECT INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT A DS 3100H 1PC SC ADS 3100H 92MM INSTALLE D ON INJECTION UNIT 1PC SC ADS 3100H 100M M PACKED SEPARATELY 1PC SPARE PARTS P O0012966 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1PC INJECT INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT A DS 3100H 1PC SC ADS 3100H 92MM INSTALLE D ON INJECTION UNIT 1PC SC ADS 3100H 100M M PACKED SEPARATELY 1PC SPARE PARTS P O0012966 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1PC INJECT INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT A DS 3100H 1PC SC ADS 3100H 92MM INSTALLE D ON INJECTION UNIT 1PC SC ADS 3100H 100M M PACKED SEPARATELY 1PC SPARE PARTS P O0012966 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1PC INJECT INJECTION MOLDING MACHINE PARTS FOR NJ DC CL AMPING UNIT J650ADS 1PC INJECTION UNIT A DS 3100H 1PC SC ADS 3100H 92MM INSTALLE D ON INJECTION UNIT 1PC SC ADS 3100H 100M M PACKED SEPARATELY 1PC SPARE PARTS P O0012966 INJECTION MOLDING MACHINE PARTS FOR NJ DC CLAMPING UNIT J650ADS 1PC INJECT ION UNIT ADS 3900H 1PC SC ADS 3100H 100M M INSTALLED ON INJECTION UNIT 1PC SC ADS 3100H 110MM PACKED SEPARATELY 1PC SPAR E PARTS HS CODE 8477.90 ATTN. MS.AIKO FUK AI EMAIL [email protected] ION UNIT ADS 3900H 1PC SC ADS 3100H 100M M INSTALLED ON INJECTION UNIT 1PC SC ADS 3100H 110MM PACKED SEPARATELY 1PC SPAR E PARTS HS CODE 8477.90 ATTN. MS.AIKO FUK AI EMAIL [email protected] ION UNIT ADS 3900H 1PC SC ADS 3100H 100M M INSTALLED ON INJECTION UNIT 1PC SC ADS 3100H 110MM PACKED SEPARATELY 1PC SPAR E PARTS HS CODE 8477.90 ATTN. MS.AIKO FUK AI EMAIL [email protected] ION UNIT ADS 3900H 1PC SC ADS 3100H 100M M INSTALLED ON INJECTION UNIT 1PC SC ADS 3100H 110MM PACKED SEPARATELY 1PC SPAR E PARTS HS CODE 8477.90 ATTN. MS.AIKO FUK AI EMAIL [email protected] ION UNIT ADS 3900H 1PC SC ADS 3100H 100M M INSTALLED ON INJECTION UNIT 1PC SC ADS 3100H 110MM PACKED SEPARATELY 1PC SPAR E PARTS HS CODE 8477.90 ATTN. MS.AIKO FUK AI EMAIL [email protected] ION UNIT ADS 3900H 1PC SC ADS 3100H 100M M INSTALLED ON INJECTION UNIT 1PC SC ADS 3100H 110MM PACKED SEPARATELY 1PC SPAR E PARTS HS CODE 8477.90 ATTN. MS.AIKO FUK AI EMAIL [email protected] |
HS 847790 |
2021-04-21 |
6 PKG |
15946KG |
INJECTION MOLDING MACHINEINJECTION MOLDING MACHINE |
HS 847710 |
2021-04-21 |
6 PCS |
15946KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI XXXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 6 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONSJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI XXXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 6 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONS |
HS 847710 |
2021-04-21 |
6 PKG |
15946KG |
INJECTION MOLDING MACHINEINJECTION MOLDING MACHINE |
HS 847710 |
2021-04-20 |
12 PCS |
25481KG |
------------ GESU6221889 DESCRIPTION----------------------GENERIC DESCRIPTION-------------JSW INJECTION MOLDING MACHINE------------ TRHU3057138 DESCRIPTION----------------------GENERIC DESCRIPTION-------------12 PACKAGES = 1 IPPC SKID (1 PIECE) 4 PLYWO LLETS (4 PIECES) 1 IPPC CRATE 5 IPPC CASE CARTON JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 PARTS FOR INJECTION MOLDING MACHINE HS CODE:8477.90 MOLD (JSW-CUP) 1 SET MOLD (JSW-SAUCER) 1 SET HOT RUNNER CONTOLLER (SERIAL NO.1905000045 ) 1 SET HS CODE:8477.90 FREIGHT PREPAID AS ARRANGED HBL JP10345456 FREIGHT PREPAID AS ARRANGED WAY BILL 1 PHONE:+81-3-5745-2081 FAX:+81-3-5745-2083 2 PHONE:+1-909-740-3808 FAX:+1-909-906-6015 ATTN:MS.AIKO FUKAI 3 PHONE:+1-909-740-3808 FAX:+1-909-906-6015 ATTN:MS.AIKO FUKAI EMAIL:INJECTION`SALES JSWAMERICA.COM |
HS 847710 |
2021-04-19 |
6 PKG |
12260KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKID (1 PIECE) & 2 CARTONS)JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKID (1 PIECE) & 2 CARTONS) HS CODE:8477.10 FREIGHT PREPAID AS ARRAN GED |
HS 847710 |
2021-04-19 |
3 PKG |
13735KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 FREIGHT PREPAID AS ARRANGE D 3 PACKAGES(1 IPPC SKID(1 PIECE) & 1 PLYWOO D PALLET(1 PIECE) & 1 CARTON) |
HS 847710 |
2021-04-19 |
4 PKG |
4846KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 FREIGHT PERPAID AS ARRANGE D 4 PACKAGES(1 IPPC SKIDS(1 PIECE) & 3 CART ONS) |
HS 847710 |
2021-04-19 |
9 PKG |
27167KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICSJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 FREIGHT PREPAID AS ARRANGE DJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS |
HS 847710 |
2021-04-19 |
12 PKG |
28206KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICSJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICSJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 FREIGHT PREPAID AS ARRANGE DJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS |
HS 847710 |
2021-04-16 |
6 PKG |
9460KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 FREIGHT PREPAID AS ARRANGE D 6 PACKAGES(2 IPPC SKID(2 PIECE) & 4 CARTON S) |
HS 847710 |
2021-04-12 |
1 CAS |
160KG |
PARTS FOR INJECTION MOLDING MACHINE HS CODE:847790 1 CASE |
HS 847790 |
2021-04-08 |
6 PKG |
22442KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1IPPC SKID(1PIECE) 1PLYWOOD PALLET(1PIECE) 1CARTON) HS CODE:8477.10 FREIGHT PREPAID AS ARRANGEDJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1IPPC SKID(1PIECE) 1PLYWOOD PALLET(1PIECE) 1CARTON) |
HS 847710 |
2021-04-08 |
5 PKG |
22893KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 FREIGHT PREPAID AS ARRANGE D 5 PACKAGES(1 IPPC SKID(1 PIECE), 1PLYWOOD PALLET(1 PIECE), 2 CARTONS, 1 BARE) |
HS 847710 |
2021-04-05 |
6 PKG |
5844KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 FREIGHT PREPAID AS ARRANGE D 6 PACKAGES(2 IPPC SKIDS(2 PIECES), 4 CARTO NS) |
HS 847710 |
2021-04-02 |
6 PCS |
7106KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XEMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 6 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONS |
HS 847710 |
2021-04-02 |
4 CAS |
10160KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTSPARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-04-02 |
5 CAS |
3356KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-04-02 |
4 CAS |
10160KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTSPARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-04-02 |
5 CAS |
3356KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-04-01 |
10 PKG |
45786KG |
INJECTION MOLDING MACHINEINJECTION MOLDING MACHINE |
HS 847710 |
2021-03-27 |
6 PCS |
8420KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI XXXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 6 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONS |
HS 847710 |
2021-03-27 |
6 PKG |
15946KG |
INJECTION MOLDING MACHINEINJECTION MOLDING MACHINE |
HS 847710 |
2021-03-27 |
5 PCS |
22893KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI XXXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 5 PACKAGES 1 IPPC SKID 1 PIECE 1 PLYWOOD PALLET 1 PIECE 2 CARTONS 1 BARE |
HS 847710 |
2021-03-19 |
11 PKG |
53441KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES(1 IPPC SKID(1 PIECE) & 1 PLYWOOD PALLETS(1 PIECE) & 1 CARTON)JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 5 PACKAGES(1 IPPC SKID(1 PIECE) & 1 PLYWOOD PALLETS(1 PIECE) & 2 CARTONS & 1 BARE) HS C ODE:8477.10 FREIGHT PREPAID AS ARRANGEDJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES(1 IPPC SKID(1 PIECE) & 1 PLYWOOD PALLETS(1 PIECE) & 1 CARTON) |
HS 847710 |
2021-03-19 |
3 PKG |
11220KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES (1 IPPC SKID (1 PIECE), 1 PLYWOOD PALLET (1 PIECES), 1 CARTON) HS CODE:8477.10 FREIGHT PREPAID AS ARRANGED |
HS 847710 |
2021-03-14 |
5 PCS |
6870KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MR.ALBERTO ALVAREZ XXXFAX +1-909-906-6015 ATTN MR.ALBERTO ALVAREZ EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 5 PACKAGES 1 IPPC SKID 1 PIECE 1 CARTON PALLET 1 PIECE 1 IPPC CRATE 2 CARTONS |
HS 847710 |
2021-03-11 |
6 PKG |
15946KG |
INJECTION MOLDING MACHINEINJECTION MOLDING MACHINE |
HS 847710 |
2021-03-11 |
6 PKG |
8420KG |
INJECTION MOLDING MACHINE |
HS 847710 |
2021-03-11 |
6 PKG |
15782KG |
INJECTION MOLDING MACHINEINJECTION MOLDING MACHINE |
HS 847710 |
2021-03-08 |
6 PCS |
9460KG |
INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI XXXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 6 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONS |
HS 847710 |
2021-03-01 |
1 CAS |
152KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-02-20 |
6 PCS |
15780KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XX ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 6 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONS X ATTN MS.AIKO FUKAIJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XX ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 6 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONS X ATTN MS.AIKO FUKAI |
HS 847710 |
2021-02-16 |
6 PKG |
27470KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES(1 IPPC SKID(1 PIECE) 1 PLYWOOD PALLET(1 PIECE) 1 CARTON ) HS CODE:8477.10 FR EIGHT PREPAID AS ARRANGEDJSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES(1 IPPC SKID(1 PIECE) 1 PLYWOOD PALLET(1 PIECE) 1 CARTON ) |
HS 847710 |
2021-02-16 |
6 PKG |
30547KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES( IPPC SKID(1 PIECE), 1 PLYWOOD PALLET(1 PIECE), 1 CARTON)JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 3 PACKAGES( IPPC SKID(1 PIECE), 1 PLYWOOD PALLET(1 PIECE), 1 CARTON) HS CODE:8477.10 FR EIGHT PREPAID AS ARRANGED |
HS 847710 |
2021-02-12 |
6 CAS |
4300KG |
PARTS FOR INJECTION MOLDING MACHINE HS CODE:847790,850152,401039,401693 6 CASES |
HS 847790 |
2021-02-12 |
6 CAS |
4300KG |
PARTS FOR INJECTION MOLDING MACHINE HS CODE:847790,850152,401039,401693 6 CASES |
HS 847790 |
2021-02-10 |
5 PCS |
22893KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X ATTN MS.AIKO FUKAI XX ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 5 PACKAGES 1 IPPC SKID 1 PIECE 2 CARTONS 1 PLYWOOD PALLET 1 PIECE 1 BARE |
HS 847710 |
2021-02-09 |
7 UNT |
128550KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE INJECTION UNIT INJECTION UNIT JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY |
HS 847710 |
2021-02-04 |
6 PKG |
15780KG |
INJECTION MOLDING MACHINEINJECTION MOLDING MACHINE |
HS 847710 |
2021-01-31 |
5 PCS |
22893KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI XXXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 5 PACKAGES 1 IPPC SKID 1 PIECE 1 PLYWOOD PALLET 1 PIECE 2 CARTONS 1 BARE |
HS 847710 |
2021-01-30 |
3 PKG |
7973KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS 1 IPPC SKID(1 PIECE), 2 CARTONS) HS CODE:847 7.10 FREIGHT PREPAID AS ARRANGED |
HS 847710 |
2021-01-23 |
9 PKG |
36174KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 . . . . .JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS . . . . . .JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE:8477.10 . . . . . |
HS 847710 |
2021-01-21 |
3 PCS |
17097KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X ATTN MS.AIKO FUKAI XX ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 3 PACKAGES 1 IPPC SKID 1 PIECE 1 PLYWOOD PALLET 1 PIECE 1 CARTON |
HS 847710 |
2021-01-11 |
1 CAS |
348KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-01-11 |
1 CAS |
112KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-01-11 |
1 CAS |
112KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-01-11 |
1 CAS |
348KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-01-07 |
3 PCS |
7973KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X ATTN MS.AIKO FUKAI XX ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDER BAR)SALES JSWAMERICA.COM 3 PACKAGES 1 IPPC SKID 1 PIECE 2 CARTONS |
HS 847710 |
2021-01-07 |
3 PCS |
3553KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X ATTN MS.AIKO FUKAI XX ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDER BAR)SALES JSWAMERICA.COM 3 PACKAGES 1 IPPC SKID 1 PIECE 2 CARTONS |
HS 847710 |
2021-01-07 |
6 PKG |
22044KG |
INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.1 0INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.1 0 |
HS 847710 |
2021-01-03 |
4 CAS |
1985KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-01-03 |
1 CAS |
640KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-01-03 |
4 CAS |
1985KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2021-01-03 |
1 CAS |
640KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-12-27 |
4 PCS |
18599KG |
INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI XXXFAX +1-909-906-6015 ATTN MS.AIKO |
HS 847710 |
2020-12-27 |
6 PKG |
33628KG |
INJECTION MOLDING MACHINE COMPLETE SETINJECTION MOLDING MACHINE COMPLETE SET JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED . INSIDE PACKAGE 6PKGS=2SKD(2PCS)+2PLT(2P |
HS 847710 |
2020-12-27 |
3 PKG |
3553KG |
INJECTION MOLDING MACHINE COMPLETE SET JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED INSIDE PACKAGE 3PKG=1SKD(1PCS)+2CTN THE SAME |
HS 847710 |
2020-12-17 |
6 PKG |
33628KG |
MOLDING MACHINE COMPLETE SETMOLDING MACHINE COMPLETE SET JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED INSIDE PACKAGE 6PKG=2SKD(2PCS) +2PLT(2PCS)+2CTN THE SAME THE |
HS 847710 |
2020-12-17 |
3 PKG |
13734KG |
MOLDING MACHINE COMPLETE SET JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED INSIDE PACKAGE 3PKG=1SKD(1PCS)+ 1PLT(1PCS)+1CTN THE SAME THE SAME |
HS 847710 |
2020-12-08 |
3 PCS |
1722KG |
JSW PARTS FOR STOCK MACHINE HS CODE 8477.90 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MR.ALBERTO ALVAREZ XXXFAX +1-909-906-6015 ATTN MR.ALBERTO ALVAREZ EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 3 CASES |
HS 847790 |
2020-12-08 |
8 PKG |
37196KG |
INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.1INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD A |
HS 847710 |
2020-12-08 |
4 PKG |
17665KG |
JSW INJECTION MOLDING MACHINE |
HS 847710 |
2020-12-03 |
3 PKG |
287KG |
INJECTION MOLDING MACHINE PARTS |
HS 847790 |
2020-12-01 |
1 CAS |
232KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-11-30 |
1 CAS |
232KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-11-23 |
10 PCS |
24985KG |
INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MR.ALBERTO ALVAREZ XXXFAX +1-909-906-6015 ATTN MR |
HS 847710 |
2020-11-23 |
6 PCS |
15946KG |
INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XFAX +81-3-5745-2083 XXFAX +1-909-906-6015 ATTN MS.AIKO FUKAI XXXFAX +1-909-906-6015 ATTN MS.AIKO |
HS 847710 |
2020-11-22 |
2 PKG |
197KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-11-22 |
2 PKG |
197KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-11-15 |
1 CAS |
208KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-11-15 |
1 CAS |
5800KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-11-15 |
1 CAS |
208KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-11-15 |
1 CAS |
5800KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-11-09 |
4 PCS |
17667KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XATTN MS.AIKO FUKAI XXATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR) SALESJSWAMERICA.COM 4 PACKAGES 1 IPPC SKID 1 PIECE 2 PLY |
HS 847710 |
2020-11-09 |
1 CAS |
103KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-11-03 |
1 CAS |
211KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-11-03 |
1 CAS |
211KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-10-28 |
1 CAS |
141KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-10-28 |
2 CAS |
3440KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-10-28 |
1 CAS |
100KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-10-28 |
2 CAS |
488KG |
INJECTION-MOLDING MACHINES FOR WORK RUBBER ORPLASTIC |
HS 847710 |
2020-10-28 |
1 CAS |
141KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-10-28 |
2 CAS |
3440KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-10-28 |
1 CAS |
100KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-10-28 |
2 CAS |
488KG |
INJECTION-MOLDING MACHINES FOR WORK RUBBER ORPLASTIC |
HS 847710 |
2020-10-18 |
6 PKG |
22440KG |
INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.1INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD A |
HS 847710 |
2020-10-08 |
6 PKG |
22440KG |
INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.1INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD A |
HS 847710 |
2020-10-08 |
1 CAS |
488KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-09-24 |
1 CAS |
196KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-09-24 |
1 CAS |
196KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-09-23 |
14 UNT |
222480KG |
INJECTION UNIT JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 CLAMPING HOUSING MOVABLE PLATEN STATIONERY PLATEN JSW INJECTION MOLDING MACHINE TIE BAR JSW INJECTION MOLDING MACHINE TIE BAR INJECTION |
HS 847710 |
2020-09-18 |
3 PCS |
11955KG |
INJECTION MOLDING MACHINE 1 X 40HC 3 PACKAGES ( 1IPPC SKID(1PIECE), 1CARTON & 1PLYWOOD PALLET(1PIECE) ) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XEMAIL INJECTION_SALESJSWAMERICA.C OM |
HS 847710 |
2020-09-03 |
1 CAS |
182KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-08-27 |
1 CAS |
167KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-08-27 |
1 CAS |
3900KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-08-27 |
1 CAS |
167KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-08-27 |
1 CAS |
3900KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-08-19 |
8 PCS |
7928KG |
MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X ATTN MS.AIKO FUKAI XX ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 8 PACKAGES 2 IPPC |
HS 847710 |
2020-08-19 |
2 CAS |
175KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-08-13 |
8 PCS |
24716KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X ATTN MS.AIKO FUKAI XX ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 8 PACKAGES 3 IPPC SKIDS 3 PIECES 1 |
HS 847710 |
2020-08-13 |
5 PCS |
16581KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X ATTN MS.AIKO FUKAI XX ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 5 PACKAGES 1 IPPC SKID 1 PIECE 3 P |
HS 847710 |
2020-08-13 |
5 PCS |
4956KG |
ACCESSORIES FOR THERMOPLASTICS JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X ATTN MS.AIKO FUKAI XX ATTN MS.AIKO FUKAI EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 5 P |
HS 847710 |
2020-08-12 |
1 CAS |
144KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-08-08 |
1 CAS |
4KG |
1 CASE INJECTION MOLDING MACHINE PARTS . . . . . . . . . |
HS 847790 |
2020-08-08 |
12 UNT |
154420KG |
STATIONARY PLATEN MOVABLE PLATEN CLAMPING HOUSING TIE BAR TIE BAR JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 COVER ETC BED INJECTION UNIT LONG LINK SECONDARY BED SAFETY DOOR |
HS 847710 |
2020-08-05 |
1 CAS |
780KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-08-05 |
1 CAS |
161KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-08-05 |
25 CAS |
58838KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASPARTS FOR MACHINE FOR WORKING RUBBER OR PLASPARTS FOR MACHINE FOR WORKING RUBBER OR PLASPARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-08-02 |
5 UNT |
97220KG |
CLAMPING UNIT INJECTION UNIT ETC JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 CLAMPING HOUSING BED FOR CLAMPING UNIT |
HS 847710 |
2020-07-23 |
1 CAS |
320KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-07-23 |
1 CAS |
320KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-07-16 |
1 CAS |
241KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-07-11 |
9 UNT |
171720KG |
1 INJECTION MOULDING MACHINERY PARTS JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 JSW INJECT |
HS 847710 |
2020-07-09 |
1 CAS |
1280KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-07-09 |
1 CAS |
327KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-07-04 |
2 UNT |
45980KG |
JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 INJECTION MOULDING MACHINERY J650AD 3900H |
HS 847790 |
2020-07-04 |
2 UNT |
40600KG |
INJECTION MOULDING MACHINERY J650AD 2300H JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 |
HS 847790 |
2020-07-01 |
16 UNT |
228920KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 1000 METRIC TON MODEL J1000 AD 5200H 1 SET SERIAL NO. CLAMPING UNIT.219844168168 INJECTION UNIT .219847910910 JSW INJECTION MOLDING MACHINE COMPLETE SE |
HS 847710 |
2020-07-01 |
1 CAS |
170KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-06-25 |
7 PKG |
30597KG |
INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.1 0INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD |
HS 847710 |
2020-06-17 |
1 CAS |
324KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-06-17 |
1 CAS |
430KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-06-17 |
1 CAS |
164KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-06-12 |
12 PKG |
25080KG |
INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.1 0INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD |
HS 847710 |
2020-06-12 |
6 PKG |
12540KG |
INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.1 0INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD |
HS 847710 |
2020-06-05 |
4 UNT |
84000KG |
JSW J650AD 3100H 1 JSW J650AD 3100H 2 JSW J650AD 3100H JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 650 METRIC TON MODEL J650AD S 3100H 1 SET SERIAL NO. CLAMPING UNIT.21 9841878878 INJECTION UNIT. |
HS 847710 |
2020-06-04 |
1 CAS |
533KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-06-04 |
6 PKG |
29746KG |
INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.1 0INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD |
HS 847710 |
2020-05-25 |
2 UNT |
41600KG |
JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 INJECTION MOULDING MACHINERY MM 19 3618 |
HS 847790 |
2020-05-25 |
2 UNT |
61800KG |
INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 |
HS 847790 |
2020-05-25 |
2 UNT |
41280KG |
INJECTION MOULDING MACHINERY 2 JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 |
HS 847790 |
2020-05-24 |
2 UNT |
42000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 650 METRIC TON MODEL J650A D 3100H 1 SET SERIAL NO. CLAMPING UNIT. 219841872872 INJECTION UNIT.21984 6677677 HS CODE 8477.10 INJECTION MOULDING MACHINE |
HS 847710 |
2020-05-13 |
7 PCS |
5039KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 100 METRIC TON MODEL J100ADS-110U HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 7 PACKAGES 1 IPPC SKID 1 |
HS 847710 |
2020-05-13 |
6 PKG |
15946KG |
INJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 180 METRIC TONINJECTION-MOLDING MACH FOR WORK RUBBER OR PLAJSW INJECTION MOLDING MACHINE COMPLETE SET |
HS 847710 |
2020-05-08 |
2 UNT |
42000KG |
JSW J650AD 3100H INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 650 METRIC TON MODEL J650A D 3100H 1 SET SERIAL NO. CLAMPING UNIT. 219841873873 INJECTION UNIT.21984 6678678 |
HS 847710 |
2020-04-30 |
6 PKG |
15946KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE; 8477.10JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE; 8477.10 |
HS 847710 |
2020-04-28 |
3 PKG |
14122.84KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLAST ICS, CLAMPING FORCE 280 METR IC TON MODEL: J280ADS-890H 1 SET SERIAL NO.: CL AMPING UNIT.21982C616616 INJ ECTION UNIT.21982HD40D40 HS CODE : 8477.10 # T)03 -6254-6038 F)0 |
HS 847710 |
2020-04-23 |
4 PCS |
3095KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 50 METRIC TON MODEL J50ADS-60U 1 SET SERIAL NO. CLAMPING UNIT.21981B480480 INJECTION UNIT.21981N845845 HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X AT |
HS 847710 |
2020-04-23 |
2 CAS |
3260KG |
ENGINES AND MOTORS |
HS 841280 |
2020-04-23 |
3 CAS |
2272KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-04-21 |
4 UNT |
47755KG |
JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 SC ASSY INJECTION UNIT INJECTION MOULDING MACHINERY J650AD 3900H |
HS 847790 |
2020-04-21 |
4 UNT |
43185KG |
INJECTION UNIT SC ASSY JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 INJECTION MOULDING MACHINERY J650AD 3100H |
HS 847790 |
2020-04-21 |
4 UNT |
37195KG |
INJECTION UNIT JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 SC ASSY INJECTION MOULDING MACHINERY J550AD 2300H |
HS 847790 |
2020-04-19 |
12 PKG |
25240KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 847710JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 847710 |
HS 847710 |
2020-04-19 |
16 PCS |
79418KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 8477.10JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 8477.10JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 8477.10JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 8477.10 |
HS 847710 |
2020-04-11 |
7 PCS |
7108KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 80 METRIC TON MODEL J80ADS-30U 2 SETS 1ST SET SERIAL NO. FOR PO0011049 CLAMPING UNIT.21981C366366 / INJECTION UNIT.21981M202202 2ND SET SERIAL NO. FOR |
HS 847710 |
2020-04-11 |
1 CAS |
2920KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-04-04 |
2 CAS |
289KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-04-04 |
3 CAS |
1399KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-04-04 |
1 CAS |
1495KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-04-04 |
8 CAS |
15670KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2020-04-04 |
2 CAS |
594KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2020-03-31 |
2 UNT |
26926KG |
INJECTION UNIT MM19 3608 JSW INJECTION MOLDING MACHINE INJECTION UNIT FOR THERMOPLASTICS CLAMPING FORCE 1800 ME TRIC TON MODEL AD 9500H 1 SET S ERIAL NO. 2 19360801 036 HS CODE 8477.10 |
HS 847710 |
2020-03-25 |
7 CAS |
490KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-03-25 |
1 CAS |
1360KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-03-25 |
7 CAS |
490KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-03-25 |
1 CAS |
1360KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-03-19 |
3 PCS |
3760KG |
INJECTION MOLDING MACHINE ( 3 STEEL BOXES(3BARES) ) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 20 METRIC TON MODEL JT20RAD-20V 1 SET SERIAL NO. CLAMPING UNIT.218864100100 INJECTION UNIT.21886819 |
HS 847710 |
2020-03-19 |
12 PKG |
22078KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WIHS 8477.10JSW INJECTION MOLDING MACHINE COMPLETE SET WIHS 8477.10 |
HS 847710 |
2020-03-19 |
10 PCS |
45794KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 10 PACKAGES 2 IPPC SKIDS 2 PIECES 2 PLYWOOD PALLETS 2 PIECES 4 CARTONS 2 UNPACKED OR UNP XX E |
HS 847710 |
2020-03-19 |
1 CAS |
266KG |
ENGINES AND MOTORS |
HS 841280 |
2020-03-19 |
2 CAS |
3335KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-03-19 |
3 PKG |
440KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-03-05 |
1 CAS |
740KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-02-26 |
4 PCS |
7997KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 180 METRIC TON MODEL J180ADS-300U 1 SET SERIAL NO. CLAMPING UNIT.21981F795795 INJECTION UNIT.21981V447447 HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X |
HS 847710 |
2020-02-14 |
14 PCS |
15991KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 50 METRIC TON MODEL J50ADS-60U 1 SET SERIAL NO. CLAMPING UNIT.21881B445445 INJECTION UNIT.21981N829829 JSW INJECTION MOLDING MACHINE COMPLETE SET WITH |
HS 847710 |
2020-02-14 |
3 PKG |
890KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-02-14 |
1 PKG |
191KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-02-06 |
3 PKG |
2396KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-02-06 |
205 PCS |
11118KG |
FLUORO-POLYMERS , IN PRIMARY FORMSFLUORO-POLYMERS , IN PRIMARY FORMS |
HS 390690 |
2020-01-30 |
18 PKG |
34701KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WIS. CODE 8477.10JSW INJECTION MOLDING MACHINE COMPLETE SET WIS. CODE 8477.10JSW INJECTION MOLDING MACHINE COMPLETE SET WIS. CODE 8477.10 |
HS 847710 |
2020-01-30 |
1 CAS |
518KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-01-30 |
1 CAS |
321KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-01-30 |
1 CAS |
518KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-01-30 |
1 CAS |
321KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2020-01-25 |
12 BOX |
138720KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS. CLAMPING FORCE 650 METRIC TON. MODEL : J650AD -3900H 3 SETS |
HS 847710 |
2020-01-18 |
5 CAS |
20040KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASPARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2020-01-17 |
1 CAS |
162KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-01-17 |
1 CAS |
1230KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2020-01-08 |
12 PKG |
28040KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WI847710JSW INJECTION MOLDING MACHINE COMPLETE SET WI847710JSW INJECTION MOLDING MACHINE COMPLETE SET WI847710JSW INJECTION MOLDING MACHINE COMPLETE SET WI847710 |
HS 847710 |
2020-01-06 |
1 CAS |
39KG |
PARTS FOR THIXOMOLDING MACHINESCREW |
HS 851490 |
2020-01-02 |
6 PKG |
22443KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WI847710JSW INJECTION MOLDING MACHINE COMPLETE SET WI847710 |
HS 847710 |
2020-01-02 |
2 PKG |
209KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-12-26 |
2 PCS |
17270KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 220 METRIC TON MODEL JT220RAD-890H 1 SET SERIAL NO. CLAMPING UNIT. 219251601115 INJECTION UNIT.218827E84E84 HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED |
HS 847710 |
2019-12-18 |
1 CAS |
238KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-12-18 |
1 CAS |
238KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-12-13 |
8 BOX |
92480KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 650 METRIC TONS |
HS 847710 |
2019-12-12 |
1 CAS |
298KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-12-08 |
4 UNT |
63894KG |
CLAMPING UNIT INJECTION UNIT SC ASSY JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 EMAIL INJECTION_SALES@JSWAMERIC A.COM |
HS 847790 |
2019-12-08 |
1 UNT |
52KG |
JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 EMAIL INJECTION_SALES@JSWAMERI CA.COM |
HS 847790 |
2019-12-05 |
2 CAS |
5425KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2019-12-02 |
1 UNT |
29355KG |
15KT PRESS MAIN CYLINDER PO NO. 2323028 DE LIVERY ADDRESS ARCONIC WHEEL & FORGED PRODUC TS ARCONIC WAREHOUSE 4595 VAN EPPS RD BROOKL YN HEIGHTS OH 44131 UNITED STATES HTS COD E 8466.94 ALSO NOTIFY JAS PROJECTS USA 350 STARKE RD. UNIT 200 CARLSTADT NJ 0707 |
HS 441310 |
2019-11-30 |
4 UNT |
43209KG |
SC ASSY 3100H JSW INJECTION MOLDING MACHINE PARTS HS CODE 8477.90 EMAIL INJECTION_SALES@JSWAMERI CA.COM CLAMPING UNIT INJECTION UNIT |
HS 847790 |
2019-11-28 |
1 CAS |
569KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-11-28 |
1 CAS |
601KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-11-28 |
1 CAS |
212KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-11-28 |
1 CAS |
149KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-11-28 |
1 CAS |
569KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-11-28 |
1 CAS |
601KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-11-28 |
1 CAS |
212KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-11-28 |
1 CAS |
149KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-11-21 |
6 CAS |
18940KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2019-11-21 |
1 CAS |
2150KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2019-11-13 |
1 CAS |
6760KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2019-11-13 |
6 PKG |
8420KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WIS. CODE 8477.10 |
HS 847710 |
2019-11-10 |
12 PKG |
49910KG |
JSW INJECTION MOLDING MACHINE COMPLETE SER WI8477.10JSW INJECTION MOLDING MACHINE COMPLETE SER WI8477.10JSW INJECTION MOLDING MACHINE COMPLETE SER WI8477.10JSW INJECTION MOLDING MACHINE COMPLETE SER WI8477.10 |
HS 847710 |
2019-11-07 |
2 UNT |
45980KG |
JSW J650AD 3900H INJECTION MOULDING MACHINE CLAMPING UNIT JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 EMAIL INJECTION_SALES @JSWAMERICA.COM |
HS 847710 |
2019-11-06 |
2 PCS |
1554KG |
JSW PARTS FOR STOCK MACHINE HS CODE 8477.90 FREIGHT PREPAID AS ARRANGED XXEMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 2 CASES |
HS 847790 |
2019-11-06 |
2 CAS |
1389KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-11-06 |
1 CAS |
533KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-11-06 |
2 CAS |
344KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-10-27 |
6 CAS |
4905KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-10-14 |
6 PKG |
15780KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 847710JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 847710 |
HS 847710 |
2019-10-02 |
7 PKG |
1876KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2019-10-01 |
12 PKG |
25238KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 847710JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 847710 |
HS 847710 |
2019-09-24 |
6 PKG |
12260KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 847710JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 847710 |
HS 847710 |
2019-09-18 |
1 CAS |
590KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-09-11 |
2 UNT |
42000KG |
JOB NO. MM18 2136 INJECTION MOLDING MACHINE J650AD 3100H JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 |
HS 847710 |
2019-09-11 |
6 PKG |
12258KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WILAMPING FORCE 130 METRIC TON, HS CODE 847710JSW INJECTION MOLDING MACHINE COMPLETE SET WILAMPING FORCE 130 METRIC TON, HS CODE 847710 |
HS 847710 |
2019-09-11 |
4 CAS |
1606KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-09-11 |
6 PCS |
12258KG |
INJECTION MOLDING MACHINE 6 PACKAGES (2IPPC SKIDS(2BARES) & 4CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XXEMAIL INJECTION_SALESJSWAMERICA. COMINJECTION |
HS 847710 |
2019-08-29 |
6 PCS |
9660KG |
MACHINE COMPLETE SET (2IPPC SKIDS(2BARES) & 4CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL INJECTION_SALESJSWAMERICA. COM |
HS 847710 |
2019-08-29 |
25 PCS |
69774KG |
INJECTION MOLDING MACHINE 25 PACKAGES (8IPPC SKIDS(8BARES), 14CARTONS, 1BARE & 2PLYWOOD PALLETS(2CARTONS)) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XXEMAIL INJECTIO |
HS 847710 |
2019-08-29 |
6 PCS |
14020KG |
INJECTION MOLDING MACHINE (2IPPC SKIDS(2BARES) & 4CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL INJECTION_SALESJSWAMERICA. COMINJECTION MOLDING MACHINE (2IPPC SKIDS(2BARES) & |
HS 847710 |
2019-08-29 |
11 PCS |
36912KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 11 PACKAGES 3 IPPC SKIDS 3 PIECES 1 PLYWOOD PALLET 1 PIECE 6 CARTONS 1 BARE XXEMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM |
HS 847710 |
2019-08-29 |
6 PCS |
14020KG |
INJECTION MOLDING MACHINE 6 PACKAGES (2IPPC SKIDS(2BARES) & 4CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XXEMAIL INJECTION_SALESJSWAMERICA. COMINJECTION |
HS 847710 |
2019-08-21 |
2 CAS |
587KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-08-21 |
14 PCS |
48135KG |
INJECTION MOLDING MACHINE 14PACKAGES (1BARE, 2PLYWOOD PALLETS(2CARTONS), 4IPPC SKIDS(4BARES) & 7CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10INJECTION MOLDING MACHINE 14PACKAGES (1BAR |
HS 847710 |
2019-08-21 |
1 PCS |
356KG |
JSW PARTS FOR STOCK MACHINE HS CODE 8477.90 FREIGHT PREPAID AS ARRANGED XXEMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 1 CASE |
HS 847790 |
2019-08-21 |
5 PCS |
22892KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 5 PACKAGES 1 IPPC SKID 1 PIECE 2 CARTONS 1 PLYWOOD PALLET 1 PIECE 1 BARE |
HS 847710 |
2019-08-14 |
20 PCS |
62398KG |
INJECTION MOLDING MACHINE 1 X 40DC, 4 X 40HC 20 PACKAGES (6IPPC SKIDS(6BARES), 9CARTONS, 1BARE & 4PLYWOOD PALLETS(4CARTONS)) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL INJECTION_SALESJSW |
HS 847710 |
2019-08-14 |
8 PCS |
6164KG |
INJECTION MOLDING MACHINE 8 PACKAGES (2IPPC SKIDS(2BARES) & 6CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 50 METRIC TON MODEL J50ADS-60U 2 SETS 1ST SET SERIAL NO. FOR PO0010313 CLAMPING U |
HS 847710 |
2019-08-14 |
13 PCS |
60092KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 13 PACKAGES 3 IPPC SKIDS 3 PIECES 4 CARTONS 3 PLYWOOD PALLETS 3 PIECES 3 BARES XXEMAIL INJECT |
HS 847710 |
2019-08-14 |
26 CAS |
350849KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS |
HS 847710 |
2019-08-14 |
3 CAS |
4240KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-08-08 |
6 PKG |
12258KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 8477.10JSW INJECTION MOLDING MACHINE COMPLETE SET WICODE 8477.10 |
HS 847710 |
2019-08-08 |
5 CAS |
6855KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2019-08-08 |
2 CAS |
207KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-08-08 |
9 PCS |
13904KG |
INJECTION MOLDING MACHINE (3IPPC SKIDS(3BARES) & 6CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL INJECTION_SALES JSWAMERICA.COMINJECTION MOLDING MACHINE (3IPPC SKIDS(3BARES) & |
HS 847710 |
2019-08-08 |
5 PCS |
22892KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 5 PACKAGES 1 IPPC SKID 1 PIECE 2 CARTONS 1 PLYWOOD PALLET 1 PIECE 1 BARE XX EMAIL INJECTION(U |
HS 847710 |
2019-07-31 |
3 PCS |
16814KG |
MOLDING MACHINE COMPLETE SET 3 PACKAGES (1IPPC SKID(1BARE), 1CARTON & 1PLYWOOD PALLET(1CARTON) ) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL INJECTION_SALESJSWAMERICA. COM |
HS 847710 |
2019-07-31 |
6 PCS |
9658KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 6 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONS XXEMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM |
HS 847710 |
2019-07-24 |
12 PKG |
24364KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WIS. CODE 8477.10JSW INJECTION MOLDING MACHINE COMPLETE SET WIS. CODE 8477.10 |
HS 847710 |
2019-07-24 |
6 PKG |
8418KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WIS. CODE 8477.10 |
HS 847710 |
2019-07-24 |
8 PCS |
12844KG |
JSW INJECTION MOLDING MACHINE 8 PACKAGES ( 2IPPC SKIDS(2BARES) & 6CARTONS ) DETAILS AS PER ATTACHED SHEET XXATTN MS.AIKO FUKAI XXX ATTN MS.AIKO FUKAI EMAIL INJECTION_SALESJSWAMERICA. COM |
HS 847710 |
2019-07-24 |
6 PCS |
24787KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 6 PACKAGES 2 IPPC SKIDS 2 PIECES 1 PLYWOOD PALLET 1 PIECE 3 CARTONS XXEMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COMJSW |
HS 847710 |
2019-07-17 |
6 PCS |
26319KG |
INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL INJECTION_SALESJSWAMERICA. COM 6 PACKAGES (2IPPC SKIDS(2BARES), 2CARTONS & 2PLYWOOD PALLETS(2CARTONS ))INJECTION |
HS 847710 |
2019-07-17 |
4 PCS |
10702KG |
INJECTION MOLDING MACHINE 4 PACKAGES (1IPPC SKID(1BARE), 1CARTON & 2PLYWOOD PALLETS(2CARTONS )) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 220 METRIC TON MODEL J220ADS-300H 1 SET SERIAL NO. CLAM |
HS 847710 |
2019-07-15 |
2 CAS |
41700KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 650 METRIC TON |
HS 847710 |
2019-07-15 |
5 CAS |
97220KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 1300 METRIC TON |
HS 847710 |
2019-07-12 |
9 PCS |
14986KG |
INJECTION MOLDING MACHINE (2IPPC SKIDS(2BARES), 2PLYWOOD PALLETS(2CARTONS), 4CARTONS & 1CARTON PALLET(1CARTON) ) AS PER ATTACHED SHEET XXATTN MS.AIKO FUKAI XXX ATTN MS.AIKO FUKAI EMAIL INJECTION_SALESJSWAMERICA. COMINJECTION MOLDING MACHINE (2IPPC SK |
HS 290512 |
2019-07-12 |
8 PCS |
30865KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 8 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONS 1 PLYWOOD PALLET 1 PIECE 1 BARE XXATTN MS.AIKO FUK |
HS 847710 |
2019-07-12 |
4 PCS |
7997KG |
JSW INJECTION MOLDING MACHINE 20DC X 1 4 PACKAGES (1IPPC SKID(1BARE) & 3CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 180 METRIC TON MODEL J180ADS-300U 1 SET SERIAL NO. CLAMPING UNIT.21881 |
HS 847710 |
2019-07-03 |
8 PCS |
21388KG |
INJECTION MOLDING MACHINE 8 PACKAGES (2IPPC SKIDS(2BARES), 2CARTONS & 4PLYWOOD PALLETS(4CARTONS) ) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 220 METRIC TON MODEL J220ADS-300H 2 SETS 1ST SET SER |
HS 847710 |
2019-07-03 |
6 PCS |
9658KG |
INJECTION MOLDING MACHINE 6 PACKAGES (2IPPC SKIDS(2BAREAS) & 4CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XX ATTN MS.AIKO FUKAI EMAIL INJECTION_SALESJSWAMERICA. COM |
HS 847710 |
2019-07-03 |
6 PKG |
9658KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WIS. CODE 8477.10 |
HS 847710 |
2019-06-27 |
1 CAS |
76KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-06-27 |
3 CAS |
952KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-06-27 |
1 CAS |
284KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-06-27 |
1 CAS |
76KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-06-27 |
3 CAS |
952KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-06-27 |
1 CAS |
284KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-06-19 |
6 PCS |
22898KG |
JSW INJECTION MOLDING MACHINE 6PACKAGES ( 1IPPC SKID(1BARE), 1BARE, 1CARTON & 3PLYWOOD PALLETS(3CARTONS) ) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 450 METRIC TON MODEL J450ADS-1400H 1 SET SER |
HS 847710 |
2019-06-19 |
5 PCS |
13251KG |
INJECTION MOLDING MACHINE ( 1IPPC SKID(1BARE), 2CARTONS & 2PLYWOOD PALLETS(2CARTONS) ) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 280 METRIC TON MODEL J280ADS-460H 1 SET SERIAL NO. CLAMPING UNIT |
HS 847710 |
2019-06-19 |
1 CAS |
580KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-06-19 |
1 CAS |
580KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-06-12 |
6 PKG |
15946KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WIS. CODE 8477.10JSW INJECTION MOLDING MACHINE COMPLETE SET WIS. CODE 8477.10 |
HS 847710 |
2019-06-12 |
1 CAS |
208KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-06-12 |
3 PCS |
11220KG |
JSW INJECTION MOLDING MACHINE 40HC X 1 3PACKAGES (1IPPC SKID(1BARE), 1CARTON & 1PLYWOOD PALLET(1CARTON)) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 X EMAIL INJECTION_SALESJSWAMERICA. COM |
HS 847710 |
2019-06-12 |
6 PCS |
28032KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 6 PACKAGES 2 IPPC SKIDS 2 PIECES 2 PLYWOOD PALLETS 2 PIECES 2 CARTONS XXEMAIL INJECTION(UNDER |
HS 847710 |
2019-06-12 |
4 PCS |
3083KG |
JSW INJECTION MOLDING MACHINE 4 PACKAGES (1IPPC SKID(1BARE) & 3CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 50 METRIC TON MODEL J50ADS-60U 1 SET SERIAL NO. CLAMPING UNIT.21881B378378 INJE |
HS 847710 |
2019-06-05 |
6 PCS |
24072KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 6 PACKAGES 2 IPPC SKIDS 2 PIECES 3 CARTONS 1 PLYWOOD PALLET 1 PIECE XXEMAIL INJECTION(UNDERBA |
HS 847710 |
2019-06-05 |
4 PCS |
10783KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 220 METRIC TON MODEL J220ADS-300H 1 SET SERIAL NO. CLAMPING UNIT.21882B726726 INJECTION UNIT.21882F128128 HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED X |
HS 847710 |
2019-06-05 |
3 PCS |
3850KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 20 METRIC TON MODEL JT20RAD-20V 1 SET SERIAL NO. CLAMPING UNIT.218864090090 INJECTION UNIT.218868180180 HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XXE |
HS 847710 |
2019-06-05 |
1 CAS |
313KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2019-05-30 |
3 PCS |
7972KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 3 PACKAGES 1 IPPC SKID 1 PIECE 2 CARTONS XXEMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM |
HS 847710 |
2019-05-21 |
2 CAS |
62800KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS |
HS 847710 |
2019-05-15 |
6 PCS |
8405KG |
JSW PARTS FOR STOCK MACHINE HS CODE 8477.90 XX EMAIL INJECTION_SALESJSWAMERICA. COM |
HS 847790 |
2019-05-15 |
6 PCS |
27470KG |
INJECTION MOLDING MACHINNE 6PACKAGES (2IPPC SKIDS(2BARES), 2PLYWOOD PALLETS(2CARTONS) & 2CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL INJECTION_SALESJSWAMERICA. COMINJECTION |
HS 847710 |
2019-05-15 |
9 PCS |
33657KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED XXEMAIL INJECTION(UNDERBAR)SALES JSWAMERICA.COM 9 PACKAGES 3 IPPC SKIDS 3 PIECES 3 CARTONS 3 PLYWOOD PALLETS 3 PIECESJ |
HS 847710 |
2019-05-15 |
3 CAS |
2247KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-05-15 |
10 CAS |
11104KG |
TRANSMISSION SHAFTS (INCLUDING CAM-&CRANK-SHAFT) & CRANK |
HS 848330 |
2019-05-15 |
4 CAS |
3352KG |
MACHINERY FOR MATERIALS TREATMENT BY TEMPERATURE CONTROL |
HS 841989 |
2019-05-10 |
3 PCS |
880KG |
INJECTION MOLDING MACHINE SYSTEM FOR INJECTION MOLDING MACHINE HORIZONTAL SUB UNIT FLIP20 HS CODE 8477.90 FREIGHT PREPAID AS ARRANGED 3 IPPC CASES |
HS 847790 |
2019-05-10 |
10 PCS |
45786KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 10 PACKAGES 2 IPPC SKIDS 2 PIECES 2 PLYWOOD PALLETS 2 PIECES 4 CARTONS 2 BARES XX EMAIL INJECTION(UNDERBAR)SALES JSWAMERICA |
HS 847710 |
2019-05-10 |
3 PCS |
6129KG |
JSW INJECTION MOLDING MACHINE 3PACKAGES (1IPPC SKID(1BARE), & 2CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL INJECTION_SALESJSWAMERICA. COM |
HS 847710 |
2019-05-09 |
1 CAS |
357KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-05-03 |
6 UNT |
108950KG |
INJECTION MOULDING MACHINERY INJECTION MOULDING MACHINERY INJECTION UNIT J550AD 3100H CLAMPING UNIT INJECTION MOULDING MACHINERY INJECTION UNIT JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 1000 ME |
HS 847710 |
2019-05-02 |
2 CAS |
42000KG |
2 IPPC CASE(S) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR T HERMOPLASTICS |
HS 847710 |
2019-05-02 |
2 CAS |
42000KG |
2 IPPC CASE(S) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR T HERMOPLASTICS, CLAMPING FORCE 650 METRIC TON MODEL: J650AD-3100H 1 SET |
HS 847710 |
2019-05-02 |
2 CAS |
62800KG |
2 IPPC CASE(S) JSW INJECTION MOLDING MACHINE COMPLETE WITH STANDARD ACCESSORIES FOR THERM OPLASTICS |
HS 847710 |
2019-05-02 |
6 PKG |
12260KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W HS CODE 847710JSW INJECTION MOLDING MACHINE COMPLETE SET W HS CODE 847710 |
HS 847710 |
2019-05-02 |
6 PCS |
27470KG |
INJECTION MOLDING MACHINE 6PACKAGES (2IPPC SKIDS(2BARES), 2PLYWOOD PALLETS(2CARTONS) & 2CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHINE |
HS 847710 |
2019-05-02 |
6 PCS |
22439KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 6 PACKAGES 2 IPPC SKIDS 2 PIECES 2 CARTONS 2 PLYWOOD PALLETS 2 PIECES XXEMAIL INJECTION(UNDER |
HS 847710 |
2019-05-01 |
10 CAS |
7744KG |
BLOW-MOLDING MACHINESBLOW-MOLDING MACHINES |
HS 847730 |
2019-04-24 |
1 CAS |
331KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-24 |
1 CAS |
310KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-24 |
1 CAS |
205KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-24 |
2 CAS |
718KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-24 |
2 CAS |
220KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-24 |
13 PCS |
51915KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 13 PACKAGES 3 IPPC SKIDS 3 PIECES 2 PLYWOOD PALLETS 2 PIECES 6 CARTONS 2 BARES XX EMAIL SALESJSWPMI.COMJSW INJECTION M |
HS 847710 |
2019-04-24 |
8 PCS |
16066KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 180 METRIC TON MODEL J180ADS-300U 1 SET SERIAL NO. CLAMPING UNIT.21881F534534 INJECTION UNIT.21881V306306 JSW INJECTION MOLDING MACHINE COMPLETE SET WI |
HS 847710 |
2019-04-24 |
1 CAS |
331KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-24 |
1 CAS |
310KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-24 |
1 CAS |
205KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-24 |
2 CAS |
718KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-24 |
2 CAS |
220KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-17 |
12 PCS |
54940KG |
INJECTION MOLDING MACHINNE 12PACKAGES (4IPPC SKIDS(4BARES), 4PLYWOOD PALLETS(4CARTONS) & 4CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHI |
HS 847710 |
2019-04-17 |
3 PCS |
13734KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 3 PACKAGES 1 IPPC SKID 1 PIECE 1 PLYWOOD PALLET 1 PIECE 1 CARTON XXEMAIL SALESJSWPMI.COM |
HS 847710 |
2019-04-17 |
4 CAS |
5510KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-17 |
1 CAS |
431KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-14 |
10 PCS |
45786KG |
INJECTION MOLDING MACHINNE 10PACKAGES (2IPPC SKIDS(2BARES), 2PLYWOOD PALLETS(2CARTONS), 4CARTONS & 2BARES JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDIN |
HS 847710 |
2019-04-14 |
3 PCS |
16815KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 3 PACKAGES 1 IPPC SKID 1 PIECE 1 PLYWOOD PALLET 1 PIECE 1 CARTON XXEMAIL SALESJSWPMI.COM |
HS 847710 |
2019-04-14 |
1 CAS |
520KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-04-04 |
6 UNT |
139200KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 650 METRIC TON MODEL J650A D 3900H 3 SETS 1ST SET SERIAL NO. FOR PO 0009359 CLAMPING UNIT.218841780780 INJECT ION UNIT.218847797797 2ND SET SERIAL NO. |
HS 847710 |
2019-04-03 |
3 PCS |
16815KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 3 PACKAGES 1 IPPC SKID 1 PIECE 1 PLYWOOD PALLET 1 PIECE 1 CARTON XXEMAIL SALESJSWPMI.COM |
HS 847710 |
2019-04-03 |
10 PCS |
45786KG |
INJECTION MOLDING MACHINNE 10PACKAGES (2IPPC SKIDS(2BARES), 2PLYWOOD PALLETS(2CARTONS), 4CARTONS & 2BARES JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDIN |
HS 847710 |
2019-03-30 |
1 CAS |
577KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-03-30 |
6 PCS |
27469KG |
INJECTION MOLDING MACHINNE 6PACKAGES (2IPPC SKIDS(2BARES), 2PLYWOOD PALLETS(2CARTONS) & 2CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHIN |
HS 847710 |
2019-03-30 |
13 PCS |
59522KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 13 PACKAGES 3 IPPC SKIDS 3 PIECES 3 PLYWOOD PALLETS 3 PIECES 5 CARTONS 2 BARES XXEMAIL SALESJ |
HS 847710 |
2019-03-21 |
2 CAS |
1080KG |
HYDRAULIC POWER ENGINES AND MOTORS, LINEAR ACTING |
HS 841290 |
2019-03-21 |
6 PCS |
15944KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 6 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONS XXEMAIL SALESJSWPMI.COMJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 6 PACKAGES 2 IPPC SKIDS 2 PIECES 4 CARTONS XXEMAIL SALESJSWPMI.COM |
HS 847710 |
2019-03-21 |
16 PCS |
61731KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 16 PACKAGES 4 IPPC SKIDS 4 PIECES 8 CARTONS 2 PLYWOOD PALLETS 2 PIECES 2 BARES XXEMAIL SALESJSWPMI.COMJSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 16 PACKAGES 4 IPPC SKIDS 4 PIECES 8 CARTONS 2 PLYWOOD PALLETS 2 PIECES 2 BARES XXEMAIL SALESJSWPMI.COMJSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 16 PACKAGES 4 IPPC SKIDS 4 PIECES 8 CARTONS 2 PLYWOOD PALLETS 2 PIECES 2 BARES XXEMAIL SALESJSWPMI.COMJSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 16 PACKAGES 4 IPPC SKIDS 4 PIECES 8 CARTONS 2 PLYWOOD PALLETS 2 PIECES 2 BARES XXEMAIL SALESJSWPMI.COM |
HS 847710 |
2019-03-21 |
2 CAS |
1080KG |
HYDRAULIC POWER ENGINES AND MOTORS, LINEAR ACTING |
HS 841290 |
2019-03-14 |
5 PCS |
22893KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 5 PACKAGES 1 IPPC SKID 1 PIECE 1 PLYWOOD PALLET 1 PIECE 2 CARTONS 1 BARE |
HS 847710 |
2019-03-09 |
3 PCS |
16815KG |
JSW INJECTION MOLDING MACHINE JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 3 PACKAGES 1 IPPC SKID 1 PIECE 1 PLYWOOD PALLET 1 PIECE 1 CARTON |
HS 847710 |
2019-03-09 |
6 PCS |
15946KG |
INJECTION MOLDING MACHINNE 6PACKAGES (2IPPC SKIDS(2BARES), & 4CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHINNE 6PACKAGES (2IPPC SKIDS(2BARES), & 4CARTONS) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COM |
HS 847710 |
2019-03-09 |
2 CAS |
1001KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-02-23 |
2 CAS |
42000KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 650 METRIC TON MODEL: J650AD-3100H |
HS 847710 |
2019-02-21 |
6 PCS |
24954KG |
JSW INJECTION MOLDING MACHINE COMP JSW INJECTION MOLDING MACHINE COMP LETE SET WITH STANDARD ACCESSORIES FOR THERM OPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 6 PACKAGES 2 IPPC SKIDS 2 PIECES 2 PLYWOOD PALLETS 2 PIECES 2 CARTONSJSW INJECTION MOLDING MACHINE COMP JSW INJECTION MOLDING MACHINE COMP LETE SET WITH STANDARD ACCESSORIES FOR THERM OPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 6 PACKAGES 2 IPPC SKIDS 2 PIECES 2 PLYWOOD PALLETS 2 PIECES 2 CARTONS |
HS 847710 |
2019-02-21 |
3 UNT |
60230KG |
INJECTION UNIT JSW INJECTION MOLDING MACHINE COMPLETE SET W ITH STANDARD ACCESSORIES FOR THERMOPLASTICS CLAMPING FORCE 850 METRIC TON MODEL J850 ADW 3100H 1 SET SERIAL NO. CLAMPING UNI T.218843210210 INJECTION UNIT.218846593593 HS CODE 8477.10 EMAIL [email protected] INJECTION MOULDING MACHINERY JSW J850ADW 310 0H |
HS 847710 |
2019-02-20 |
2 CAS |
41700KG |
2 IPPC CASES . JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 650 METRIC TON MODEL- J650AD-2300H 1 SET SERIAL NO.-CLAMPING UNIT.218841772772 INJECTION UNIT.218845579579 HS CODE - 8477.10 --EMAIL-SALESJSWPMI.COM |
HS 847710 |
2019-02-20 |
4 CAS |
38490KG |
4 IPPC CASES . JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS, CLAMPING FORCE 550 METRIC TON MODEL- J550AD-2300H 1 SET SERIAL NO.-CLAMPING UNIT.218840471471 INJECTION UNIT.218845578578 HS CODE - 8477.10 . --EMAIL-SALESJSWPMI.COM |
HS 847710 |
2019-02-15 |
2 CAS |
1089KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-02-15 |
11 PKG |
45332KG |
INJECTION-MOLDING MACHINES FOR WORK RUBBER OINJECTION-MOLDING MACHINES FOR WORK RUBBER OINJECTION-MOLDING MACHINES FOR WORK RUBBER O |
HS 847710 |
2019-02-15 |
2 CAS |
1089KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2019-02-15 |
11 PKG |
45332KG |
INJECTION-MOLDING MACHINES FOR WORK RUBBER OINJECTION-MOLDING MACHINES FOR WORK RUBBER OINJECTION-MOLDING MACHINES FOR WORK RUBBER O |
HS 847710 |
2019-02-15 |
5 PCS |
22893KG |
INJECTION MOLDING MACHINNE 5PACKAGES (1IPPC SKIDS(1BARE), 1 PLYWOOD PALLETS(1CARTONS), 2 CARTONS & 1BARES) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COM |
HS 847710 |
2019-02-15 |
8 PCS |
34113KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 8 PACKAGES 2 IPPC SKIDS 2 PIECES 2 PLYWOOD PALLETS 2 PIECES 3 CARTONS 1 BAREJSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 8 PACKAGES 2 IPPC SKIDS 2 PIECES 2 PLYWOOD PALLETS 2 PIECES 3 CARTONS 1 BARE |
HS 847710 |
2019-02-09 |
4 PCS |
18599KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 4 PACKAGES 1 IPPC SKID 1 PIECE 1 PLYWOOD PALLET 1 PIECE 1 CARTON 1 BARE X EMAIL SALESJSWPMI.COM |
HS 847710 |
2019-02-09 |
10 PCS |
45785KG |
INJECTION MOLDING MACHINNE 10PACKAGES (2IPPC SKIDS(2BARES), 2 PLYWOOD PALLETS(2CARTONS), 4 CARTONS & 2BARES) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHINNE 10PACKAGES (2IPPC SKIDS(2BARES), 2 PLYWOOD PALLETS(2CARTONS), 4 CARTONS & 2BARES) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COM |
HS 847710 |
2019-02-03 |
5 PCS |
22893KG |
JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 FREIGHT PREPAID AS ARRANGED 5 PACKAGES 1 IPPC SKID(1 BARE) 1 PLYWOOD PALLET(1 CARTON) 2 CARTONS 1 BARE |
HS 847710 |
2019-02-03 |
16 PCS |
58044KG |
INJECTION MOLDING MACHINNE 16PACKAGES (4IPPC SKIDS(4BARES), 2 PLYWOOD PALLETS(2 CARTONS), 8 CARTONS & 2 BARES) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHINNE 16PACKAGES (4IPPC SKIDS(4BARES), 2 PLYWOOD PALLETS(2 CARTONS), 8 CARTONS & 2 BARES) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHINNE 16PACKAGES (4IPPC SKIDS(4BARES), 2 PLYWOOD PALLETS(2 CARTONS), 8 CARTONS & 2 BARES) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHINNE 16PACKAGES (4IPPC SKIDS(4BARES), 2 PLYWOOD PALLETS(2 CARTONS), 8 CARTONS & 2 BARES) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COM |
HS 847710 |
2019-01-12 |
13 PCS |
59521KG |
INJECTION MOLDING MACHINE 13PACKAGES (3IPPC SKIDS(3BARES), 3 PLYWOOD PALLETS(3 CARTONS), 5 CARTONS & 2 BARES) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHINE 13PACKAGES (3IPPC SKIDS(3BARES), 3 PLYWOOD PALLETS(3 CARTONS), 5 CARTONS & 2 BARES) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHINE 13PACKAGES (3IPPC SKIDS(3BARES), 3 PLYWOOD PALLETS(3 CARTONS), 5 CARTONS & 2 BARES) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COM |
HS 847710 |
2019-01-12 |
15 PKG |
38101KG |
INJECTION-MOLDING MACHINES FOR WORK RUBBER OINJECTION-MOLDING MACHINES FOR WORK RUBBER OINJECTION-MOLDING MACHINES FOR WORK RUBBER O |
HS 847710 |
2019-01-06 |
17 PCS |
44825KG |
INJECTION MOLDING MACHINE 17PACKAGES (5IPPC SKIDS(5BARES), 1 PLYWOOD PALLET(1 CARTON), 10 CARTONS & 1 BARE) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHINE 17PACKAGES (5IPPC SKIDS(5BARES), 1 PLYWOOD PALLET(1 CARTON), 10 CARTONS & 1 BARE) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COMINJECTION MOLDING MACHINE 17PACKAGES (5IPPC SKIDS(5BARES), 1 PLYWOOD PALLET(1 CARTON), 10 CARTONS & 1 BARE) JSW INJECTION MOLDING MACHINE COMPLETE SET WITH STANDARD ACCESSORIES FOR THERMOPLASTICS HS CODE 8477.10 XXEMAIL SALESJSWPMI. COM |
HS 847710 |
2019-01-06 |
2 CAS |
8040KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLAS |
HS 846692 |
2019-01-06 |
1 CAS |
216KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-12-20 |
3 CAS |
2030KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-12-20 |
1 CAS |
328KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-12-13 |
1 CAS |
870KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-11-30 |
8 CAS |
17629KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2017-11-30 |
1 CAS |
730KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-11-16 |
1 CAS |
591KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-10-26 |
2 PKG |
183KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-10-26 |
2 PKG |
183KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-10-19 |
2 CAS |
15620KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2017-10-19 |
2 CAS |
15620KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2017-10-12 |
1 CAS |
361KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-10-04 |
1 CAS |
161KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-10-04 |
1 CAS |
112KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-10-04 |
1 CAS |
337KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-10-04 |
1 CAS |
108KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-08-25 |
4 CAS |
2063KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2017-08-25 |
4 CAS |
2063KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2017-08-23 |
2 CAS |
896KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-08-23 |
1 CAS |
370KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-08-23 |
2 CAS |
896KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-08-23 |
1 CAS |
370KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-08-09 |
2 CAS |
3450KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2017-07-27 |
1 CAS |
323KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-07-27 |
1 CAS |
280KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-07-24 |
3 CAS |
11977KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2017-06-28 |
1 CAS |
105KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-06-28 |
1 CAS |
105KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-06-14 |
2 PKG |
391KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-06-14 |
2 CAS |
8335KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2017-05-31 |
3 CAS |
1846KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-05-31 |
1 CAS |
200KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-05-31 |
1 CAS |
290KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-05-17 |
2 CAS |
504KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-05-17 |
2 CAS |
504KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-05-10 |
1 CAS |
450KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-05-10 |
1 CAS |
450KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-04-19 |
9 CAS |
8888KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2017-04-14 |
1 CAS |
277KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-03-23 |
4 CAS |
2839KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-03-23 |
1 CAS |
299KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-03-23 |
4 CAS |
2839KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-03-23 |
1 CAS |
299KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-03-23 |
4 CAS |
2839KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-03-23 |
1 CAS |
299KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-03-16 |
1 CAS |
1950KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-03-16 |
1 CAS |
912KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-03-16 |
1 CAS |
1950KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-03-16 |
1 CAS |
912KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-03-01 |
1 CAS |
183KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-02-16 |
1 CAS |
80KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-02-16 |
1 CAS |
80KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2017-01-26 |
5 CAS |
5750KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2017-01-13 |
1 CAS |
190KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2017-01-05 |
1 CAS |
3730KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-12-28 |
9 PKG |
33620KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2016-12-21 |
1 CAS |
239KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-12-15 |
1 CAS |
164KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-12-15 |
1 CAS |
227KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-12-08 |
1 CAS |
241KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-12-02 |
2 CAS |
1409KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-11-02 |
1 CAS |
1130KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-10-26 |
1 CAS |
293KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-10-26 |
5 CAS |
8630KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2016-10-26 |
1 CAS |
293KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-10-26 |
5 CAS |
8630KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2016-10-20 |
1 CAS |
105KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-10-13 |
1 CAS |
500KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-10-13 |
1 CAS |
193KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-09-28 |
1 CAS |
406KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-09-22 |
2 CAS |
1990KG |
MACHINERY FOR WORKING RUBBER OR PLASTICS |
HS 847780 |
2016-07-20 |
2 CAS |
1204KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-07-20 |
3 CAS |
2910KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2016-06-16 |
1 CAS |
746KG |
ELECTRIC HEATING RESISTORS |
HS 851680 |
2016-05-12 |
7 CAS |
2230KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-03-16 |
1 CAS |
175KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-03-16 |
1 CAS |
139KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-03-02 |
3 CAS |
17080KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTSPARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-02-17 |
4 CAS |
17806KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTSPARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-02-17 |
3 CAS |
1905KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-02-17 |
2 CAS |
1244KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-02-11 |
1 CAS |
1650KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-01-14 |
1 CAS |
78KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-01-14 |
1 CAS |
237KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2016-01-14 |
6 CAS |
4540KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-12-23 |
1 CAS |
410KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-12-16 |
3 CAS |
4288KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-11-27 |
1 CAS |
196KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-11-18 |
1 CAS |
370KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-11-18 |
1 CAS |
270KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-11-05 |
1 CAS |
528KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-10-21 |
3 CAS |
3120KG |
CONTROL PANEL, SCREW AND ACCESSORIES UNIT FOR TWIN SCREW EXTRUDER TEX44 III (CONTROL PANEL, SCREW & ACCESSORIES) ------------------------------------ . HS CODE 8477.90, 8537.10, 7318.16 THE SAME THE SAME THE SAME THE SAME THE SAME THE SAME |
HS 847790 |
2015-09-10 |
3 CAS |
516KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-08-26 |
1 CAS |
387KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-08-13 |
1 CAS |
260KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-07-09 |
1 CAS |
323KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-07-02 |
1 CAS |
2400KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-07-02 |
1 CAS |
254KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-04-29 |
3 CAS |
2525KG |
MACHINERY FOR MOLDING OR FORMING RUBBER OR PLASTICS |
HS 847790 |
2015-04-23 |
1 CAS |
268KG |
OTHER CYLINDRICAL ROLLER BEARINGS |
HS 848250 |
2015-04-09 |
1 CAS |
225KG |
OTHER CYLINDRICAL ROLLER BEARINGS |
HS 848250 |
2015-03-26 |
1 CAS |
174KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-03-26 |
1 CAS |
174KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-03-23 |
1 CAS |
207KG |
OTHER CYLINDRICAL ROLLER BEARINGS |
HS 848250 |
2015-03-22 |
2 CAS |
2000KG |
MACHINERY FOR MOLDING OR FORMING RUBBER OR PLASTICS |
HS 847790 |
2015-03-05 |
1 CAS |
386KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2015-02-26 |
1 CAS |
570KG |
SPHERICAL ROLLER BEARINGS |
HS 848230 |
2015-02-26 |
1 CAS |
570KG |
SPHERICAL ROLLER BEARINGS |
HS 848230 |
2015-02-19 |
1 CAS |
630KG |
IRON STEEL RACK/HOCK/CLIP/CLAMP |
HS 731450 |
2015-02-19 |
1 CAS |
630KG |
IRON STEEL RACK/HOCK/CLIP/CLAMP |
HS 731450 |
2015-01-15 |
1 CAS |
198KG |
MACHINERY FOR MOLDING OR FORMING RUBBER OR PLASTICS |
HS 847790 |
2014-12-26 |
6 CAS |
11600KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-12-26 |
6 CAS |
11600KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-12-09 |
2 CAS |
1463KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-09-24 |
1 CAS |
339KG |
SPHERICAL ROLLER BEARINGS |
HS 848230 |
2014-09-03 |
1 CAS |
112KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-08-13 |
1 CAS |
368KG |
SPHERICAL ROLLER BEARINGS |
HS 848230 |
2014-07-23 |
1 CAS |
130KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-07-16 |
1 CAS |
2200KG |
MACHINERY FOR MOLDING OR FORMING RUBBER OR PLASTICS |
HS 847790 |
2014-07-16 |
7 CAS |
11120KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2014-07-12 |
1 CAS |
459KG |
MACHINERY FOR MOLDING OR FORMING RUBBER OR PLASTICS |
HS 847790 |
2014-07-12 |
2 CAS |
1610KG |
MACHINERY FOR MOLDING OR FORMING RUBBER OR PLASTICS |
HS 847790 |
2014-06-25 |
1 CAS |
170KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-06-25 |
1 CAS |
115KG |
MACHINERY FOR MOLDING OR FORMING RUBBER OR PLASTICS |
HS 847790 |
2014-06-25 |
1 CAS |
223KG |
SPHERICAL ROLLER BEARINGS |
HS 848230 |
2014-06-18 |
1 CAS |
1250KG |
MACHINERY FOR MOLDING OR FORMING RUBBER OR PLASTICS |
HS 847790 |
2014-06-18 |
3 CAS |
16740KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2014-06-11 |
2 CAS |
1020KG |
SPHERICAL ROLLER BEARINGS |
HS 848230 |
2014-06-04 |
1 CAS |
3800KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-05-21 |
4 CAS |
19820KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2014-05-14 |
1 CAS |
300KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-05-07 |
1 CAS |
72KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-04-23 |
2 CAS |
1200KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-03-27 |
3 CAS |
2720KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2014-03-26 |
2 CAS |
999KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-03-19 |
6 CAS |
11360KG |
VACUUM-MOLDING & OTHER THERMOFORMING MACHINESFOR WORK RUBBER OR PLASTICVACUUM-MOLDING & OTHER THERMOFORMING MACHINESFOR WORK RUBBER OR PLASTIC |
HS 847740 |
2014-03-05 |
1 CAS |
103KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-02-12 |
11 CAS |
19560KG |
TWIN SCREW EXTRUDER TWIN SCREW EXTRUDER (TEX65 A II-59. 5AW-6V) P.O.NO./REF.NO. P00000002764/108-1306 P00000002847/108-1315 P00000002920/108-1320 P00000002921/108-1321 P00000002924/108-1323 P00000002925/108-1322 . FREE HOUSE DELIVERY (EXCLUDING DUTY, TAX) . HS CODE 8477.20TWIN SCREW EXTRUDERTWIN SCREW EXTRUDER |
HS 847720 |
2014-01-23 |
5 CAS |
9610KG |
EXTRUDERS FOR WORKING RUBBER OR PLASTICEXTRUDERS FOR WORKING RUBBER OR PLASTIC |
HS 847790 |
2014-01-16 |
1 CAS |
475KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-01-09 |
4 CAS |
744KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
2014-01-02 |
1 CAS |
413KG |
PARTS FOR MACHINE FOR WORKING RUBBER OR PLASTER OR MANUFACTURED RUBBER OR PLASTIC PRODUCTS |
HS 847790 |
- 2
JAPAN STEEL …
- 1 trades
-
2024-10-29 |
1 SKD |
255900KG |
MAIN FIXED PLATEN |
HS 890590 |
2023-11-02 |
2 UNT |
299520KG |
FL22 0408 BACK UP ROLL FOR PLATE MILL BACK UP ROLL FOR PLATE MILL DELIVERY ADDRESS NUCOR STEEL BRANDENBURG 100 RONNIE GREEN WELL COMMERCE ROAD BRANDENBURG KY 40108 HT S CODE 8455.30 |
HS 845530 |
2023-07-17 |
1 UNT |
149760KG |
BACK UP ROLL FOR PLATE MILL DELIVERY ADDRESS NUCOR STEEL BRANDENBURG 100 RONNIE GREEN WELL COMMERCE ROAD BRANDENBURG KY 40108 HT S CODE 8455.30 |
HS 845530 |
2023-03-09 |
2 PCS |
9330KG |
C-3 PRESS MAIN CYLINDER PLUG |
HS 271019 |
2022-08-31 |
2 CAS |
4340KG |
RETAINING RINGHS CODE:8503.00 |
HS 850300 |
2022-05-08 |
1 UNT |
99545KG |
BACK UP ROLL FOR PLATE MILL HTS CODE 8455.30 DELIVERY ADDRESS SSAB IOWA INC. 1770 BILL S HARP BOULEVARD MUSCATINE IA 52761 JAS PROJ ECTS JENNIFER LEARN MS. BRANCH MANAGER PROJECTS 350 STARKE ROAD UNIT 200 CARLSTADT NJ 07072 EWR 0 1 814 881 1452 JENNIFER [email protected] |
HS 845530 |
2022-01-10 |
3 PCS |
6860KG |
RETAINING RING HS:8503.00 |
HS 850300 |
2021-01-17 |
1 UNT |
29200KG |
SPARE C7 MAIN CYLINDER |
HS 890590 |
2020-06-25 |
4 PCS |
8120KG |
RETAINING RING |
HS 293219 |
- 3
NIPPLA INC
- 1 trades
-
CYLINDER
2024-08-15 |
2 CAS |
1287KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2024-07-12 |
2 CTN |
116KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2024-06-28 |
1 CAS |
896KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2024-06-28 |
1 CAS |
896KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2024-06-14 |
1 CAS |
616KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2024-05-17 |
1 CAS |
236KG |
PARTS FOR INJECTION MOULDING MACHINE |
HS 841391 |
2024-04-01 |
5 CAS |
10717KG |
PARTS FOR INJECTION MOULDING MACHINE |
HS 841391 |
2024-02-23 |
5 PKG |
240KG |
PARTS FOR INJECTION MOULDING MACHINE |
HS 841391 |
2024-02-23 |
5 PKG |
240KG |
PARTS FOR INJECTION MOULDING MACHINE |
HS 841391 |
2024-01-17 |
1 CAS |
230KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2024-01-09 |
1 CAS |
820KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2023-12-07 |
1 CAS |
910KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2023-11-17 |
2 CAS |
2480KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2023-11-12 |
2 PKG |
1435KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2023-09-08 |
1 CTN |
16KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2023-09-08 |
1 CTN |
16KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2023-08-01 |
3 PKG |
191KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2023-07-24 |
1 CAS |
771KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2023-07-24 |
1 CAS |
771KG |
PARTS FOR INJECTION MOLDING MACHINE |
HS 847790 |
2023-07-14 |
2 PKG |
656KG |
PARTS FOR INJECTION MOLDING MACHINE (T-GROOVE PLATE, CAP BOLT, SPRING WASHER) |
HS 847790 |
2023-06-15 |
1 CAS |
1240KG |
CYLINDER |
HS 844711 |
2023-02-25 |
1 CAS |
182KG |
RAIL BASE |
HS 860290 |
2023-01-10 |
1 CAS |
329KG |
RAIL MATERIAL |
HS 860290 |
2022-12-03 |
1 CAS |
237KG |
RAIL MATERIAL |
HS 860290 |
2022-11-02 |
2 CAS |
495KG |
PARTS FOR INJECTION MOLDING MACHINE (SCREW, SLIDE WAY) |
HS 847790 |
2022-09-29 |
5 CTN |
80KG |
PARTS FOR INJECTION MOLDING MACHINE COLOR PRANT DARK GRAY COLOR PAINT FINE BLUE SPRAY PAINT PARTS FOR INJECTION MOLDING MACHINE COLOR PRANT DARK GRAY COLOR PAINT FINE BLUE SPRAY PAINT PARTS FOR INJECTION MOLDING MACHINE COLOR PRANT DARK GRAY COLOR PAINT FINE BLUE SPRAY PAINT |
HS 960340 |
2022-09-29 |
5 CTN |
80KG |
PARTS FOR INJECTION MOLDING MACHINE COLOR PRANT DARK GRAY COLOR PAINT FINE BLUE SPRAY PAINT PARTS FOR INJECTION MOLDING MACHINE COLOR PRANT DARK GRAY COLOR PAINT FINE BLUE SPRAY PAINT PARTS FOR INJECTION MOLDING MACHINE COLOR PRANT DARK GRAY COLOR PAINT FINE BLUE SPRAY PAINT |
HS 960340 |
2022-09-20 |
1 CAS |
1200KG |
PARTS FOR INJECTION MOLDING MACHINE (BALL SCREW ASSY) |
HS 847790 |
2022-09-20 |
1 CAS |
1200KG |
PARTS FOR INJECTION MOLDING MACHINE (BALL SCREW ASSY) |
HS 847790 |
2022-09-11 |
1 CAS |
1153KG |
PARTS FOR INJECTION MOLDING MACHINE (WEAR CORROSION RESISTANT CYLINDER) |
HS 847790 |
2022-09-11 |
2 PKG |
454KG |
PARTS FOR INJECTION MOLDING MACHINE (T-GROOVED PLATE, T-SLOT NUT, STUD BOLT,WASHER, LOCK NUT) |
HS 150810 |
2022-09-11 |
1 CAS |
303KG |
PARTS FOR INJECTION MOLDING MACHINE (RAIL BASE) |
HS 847790 |
2022-08-22 |
2 CAS |
294KG |
PARTS FOR INJECTION MOLDING MACHINE (BASE, SCREW) |
HS 847790 |
2022-08-22 |
2 PKG |
1573KG |
PARTS FOR INJECTION MOLDING MACHINE (T-GROOVE PLATE, ADAPTOR,CAP BOLT) |
HS 847790 |
2022-04-27 |
1 CAS |
321KG |
MOLDING MACHINE |
HS 848030 |
2022-04-27 |
1 CAS |
321KG |
MOLDING MACHINE |
HS 848030 |
2021-10-13 |
3 CAS |
3045KG |
PARTS FOR INJECTION MOLDING MACHINE T-GROOVE PLATE |
HS 847790 |
- 4
SHINWA J AND…
- 1 trades
-
2021-05-19 |
2 PKG |
1610KG |
INJECTION MOLD |
HS 848020 |
total import quantity of JAPAN STEEL WORKS AMERICA INC
| Imports in 2021 |
|---|
 6398765 KG |
 757 CTNS
|
 179 orders
|
Imports / year in kg
JAPAN STEEL WORKS AMERICA INC supplier cooperation insights
THE JAPAN STEEL WORKS LTD
#1 supplier
JAPAN STEEL WORKS AMERICA INC
the japan steel works ltd is the major supplier of japan steel works america inc
the japan steel works ltd support from japan. Their major products are ACE . japan steel works america inc gets its from the japan steel works ltd.
Address:
- gate city ohsaki-west tower 11-1 osaki 1-chome shinagawa-ku tokyo
- We don't have this supplier's contact information.
You might find it on Google.
Summary of japan steel works america inc and the japan steel works ltd's cooperation.
Between 2014 and 2017, japan steel works america inc ordered 176 shipments from the japan steel works ltd.
In 2014, japan steel works america inc made up 31% of the japan steel works ltd's sales to USA. This number went to 20% by 2015 and 16% in 2016. In 2017, japan steel works america inc made up 36% of the japan steel works ltd’s sales to USA
the japan steel works ltd products
-
1.ACE
japan steel works america inc ordered
Total trades among the two parties
| 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 26 | 30 | 54 | 0 | 165 | 129 | 176 | 100 | 124 | 142 | 0 |
JAPAN STEEL WORKS M&E INC
#2 supplier
JAPAN STEEL WORKS AMERICA INC
japan steel works m&e inc is the major supplier of japan steel works america inc
japan steel works m&e inc support from japan. Their major products are . japan steel works america inc gets its from japan steel works m&e inc.
Address:
- 4 chatsucho
- We don't have this supplier's contact information.
You might find it on Google.
Summary of japan steel works america inc and japan steel works m&e inc's cooperation.
Between 2014 and 2017, japan steel works america inc ordered 1 shipments from japan steel works m&e inc.
In 2014, japan steel works america inc made up 0% of japan steel works m&e inc's sales to USA. This number went to 0% by 2015 and 0% in 2016. In 2017, japan steel works america inc made up 0% of japan steel works m&e inc’s sales to USA
japan steel works m&e inc products
japan steel works america inc ordered
Total trades among the two parties
| 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 3 | 3 | 1 | 0 |
NIPPLA INC
#3 supplier
JAPAN STEEL WORKS AMERICA INC
nippla inc is the major supplier of japan steel works america inc
nippla inc support from japan. Their major products are CYLINDER . japan steel works america inc gets its CYLINDER from nippla inc.
Address:
- 1-6-1 funakoshiminami aki-ku hiroshima hiroshima-shi 36-0082 jp
- We don't have this supplier's contact information.
You might find it on Google.
Summary of japan steel works america inc and nippla inc's cooperation.
Between 2014 and 2017, japan steel works america inc ordered 1 shipments from nippla inc.
In 2014, japan steel works america inc made up 0% of nippla inc's sales to USA. This number went to 0% by 2015 and 0% in 2016. In 2017, japan steel works america inc made up 0% of nippla inc’s sales to USA
nippla inc products
-
1.CYLINDER
japan steel works america inc ordered
1.CYLINDER
Total trades among the two parties
| 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 13 | 12 | 11 | 0 |
SHINWA J AND K CO LTD
#4 supplier
JAPAN STEEL WORKS AMERICA INC
shinwa j and k co ltd is the major supplier of japan steel works america inc
shinwa j and k co ltd support from republic of korea. Their major products are . japan steel works america inc gets its from shinwa j and k co ltd.
Address:
- 75 5 chunui dong wonmi gu bucheon city gyeonggi do korea
- We don't have this supplier's contact information.
You might find it on Google.
Summary of japan steel works america inc and shinwa j and k co ltd's cooperation.
Between 2014 and 2017, japan steel works america inc ordered 1 shipments from shinwa j and k co ltd.
In 2014, japan steel works america inc made up 0% of shinwa j and k co ltd's sales to USA. This number went to 0% by 2015 and 0% in 2016. In 2017, japan steel works america inc made up 0% of shinwa j and k co ltd’s sales to USA
shinwa j and k co ltd products
japan steel works america inc ordered
Total trades among the two parties
| 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 |